HP A4500A Hardware Manual - rp24xx, Customer Viewable - Page 58
Cabinet Minimum Service Access Requirements, Non-HP Cabinet Installation Requirements
View all HP A4500A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Racked Server Site Requirements Cabinet Product Number C2787A Description EIA Max. Servers External Dimensions (width x depth x height) Centimeters Inches Field Integrated 2.0m x 19" Cabinet 41 20 61 x 91.4 x 203.2 24 x 36 x 80 Cabinet Minimum Service Access Requirements Access Location *Rear Sides Front 61 cm (24 in.) 30 cm (12 in.)(When extended) 101 cm (40 in.) *Minimum distance required to fully open rear access door. Non-HP Cabinet Installation Requirements rp24xx servers can be installed in cabinets other than those manufactured by HP. Refer to the installation instructions of the cabinet in which you wish to install the server. WARNING Do not install a server in any cabinet without anchoring it to the cabinet with four screws (two on each side) that attach to the front posts of the cabinet. Screws are used as a safeguard against accidental ejection in case a cabinet tips forward. rp24xx servers installed in all HP cabinets are secured with captive screws. HP will NOT support servers that are not secured to the cabinet with screws. Failure to heed this warning could result in serious personal injury or damage to the server. 66 Chapter