HP Color LaserJet CM2320 HP Color LaserJet CM2320 MFP - User Guide - Page 140
Receive fax settings, Set or change number of rings-to-answer, Use the rings-to-answer setting
View all HP Color LaserJet CM2320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
NOTE: After this report is printed, all billing data is deleted. 1. On the control panel, press Fax Menu. 2. Use the arrow buttons to select Reports, and then press OK. 3. Use the arrow buttons to select Billing report, and then press OK. The product exits the menu settings and prints the report. Receive fax settings Set or change number of rings-to-answer When the answer mode is set to Automatic, the product rings-to-answer setting determines the number of times the telephone rings before the product answers an incoming call. If the product is connected to a line that receives both fax and voice calls (a shared line) and that also uses an answering machine, you might need to adjust the rings-to-answer setting. The number of ringsto-answer for the product must be greater than the rings-to-answer on the answering machine. This allows the answering machine to answer the incoming call and record a message if it is a voice call. When the answering machine answers the call, the product listens to the call and automatically answers it if it detects fax tones. The default setting for rings-to-answer is five for the U.S. and Canada, and two for other countries/ regions. Use the rings-to-answer setting Use the following table to determine the number of rings-to-answer to use. Type of telephone line Recommended rings-to-answer setting Dedicated fax line (receiving only fax calls) Set to a number of rings within the range shown on the controlpanel display. (The minimum and maximum number of rings allowed varies by country/region.) One line with two separate numbers and a ring-pattern service One or two rings. (If you have an answering machine or computer voicemail for the other telephone number, make sure that the product is set to a greater number of rings than the answering system. Also, use the distinctive-ring feature to differentiate between voice and fax calls. See Set up distinctive ring on page 130.) Shared line (receiving both fax and voice calls) with only an Five rings or more. attached telephone Shared line (receiving both fax and voice calls) with an attached answering machine or computer voicemail Two rings more than the answering machine or computer voicemail. Set the number of rings-to-answer To set or change the number of rings-to-answer, use the following steps: 1. On the control panel, press Setup. 2. Use the arrow buttons to select Fax setup, and then press OK. 3. Use the arrow buttons to select Basic setup, and then press OK. 128 Chapter 12 Fax (fax models only) ENWW