HP Color LaserJet CM2320 HP Color LaserJet CM2320 MFP - User Guide - Page 246
Scan-quality problems
View all HP Color LaserJet CM2320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 246 highlights
Scan-quality problems Prevent scan-quality problems The following are a few simple steps you can take to improve copy and scan quality. ● Use the flatbed scanner, rather than the automatic document feeder (ADF) input tray, to scan. ● Use high-quality originals. ● Load the media correctly. If the media is loaded incorrectly, it might skew, which causes unclear images. See Load paper and print media on page 59 for instructions. ● Adjust the software settings according to how you plan to use the scanned page. See Scanner resolution and color on page 107 for more information. ● If your product frequently feeds more than one page at a time, the separation pad might need to be replaced. Contact HP. See www.hp.com/support/CM2320series or the support flyer that came in the product box. Solve scan-quality problems Problem Blank pages Too light or dark Unwanted lines Black dots or streaks Unclear text Cause Solution The original might have been loaded upside down. In the automatic document feeder (ADF), put the top end of the stack of originals into the ADF input tray, with the media stack face-up and the first page to be scanned on top of the stack. Place the original document face-down on the flatbed scanner with the upper-left corner of the document at the corner indicated by the icon on the scanner. The resolution and color levels may be set incorrectly. Verify that you have the correct resolution and color settings. See Scanner resolution and color on page 107. The ADF glass might be dirty. Clean the ADF glass. See Clean the scanner glass on page 195 (step 3). Ink, glue, correction fluid, or an unwanted Clean the flatbed scanner surface. See substance might be on the glass. Clean the scanner glass on page 195. The power to the product might have fluctuated. Reprint the job. The resolution levels might be set incorrectly. Verify that the correct resolution settings are correct. See Scanner resolution and color on page 107. The media is not laying flat on the glass. Close the scanner lid tightly. 234 Chapter 15 Problem solve ENWW