HP Color LaserJet CM2320 HP Color LaserJet CM2320 MFP - User Guide - Page 88
Use copy, One-touch copy, Multiple copies, Cancel a copy job
View all HP Color LaserJet CM2320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Use copy One-touch copy 1. Load the document into the automatic document feeder (ADF) input tray or onto the flatbed scanner. 2. Press Start Copy Black or Start Copy Color on the product control panel to start copying. 3. Repeat the process for each copy. Multiple copies You can make from 1 to 99 copies for the current job. Change the number of copies for the current job 1. On the product control panel, press # of Copies, and then use the arrow buttons to select the number of copies (between 1 and 99) that you want to make for your current job. -orFor products with a graphical display, enter the number of copies using the alphanumeric keys. 2. Press Start Copy Black or Start Copy Color to begin copying your job. NOTE: The change in the setting remains active for about 2 minutes after the copy job has been completed. During this time, Custom settings appears on the product control-panel display. Change the default number of copies You can set 1 to 99 as the default number of copies. 1. On the product control panel, press Setup. 2. Use the arrow buttons to select Copy setup, and then press OK. 3. Use the arrow buttons to select Def. # of copies, and then press OK. 4. Use the alphanumeric buttons to type the number of copies (between 1 and 99) that you want as the default. 5. Press OK to save your selection. NOTE: The factory-set default for the number of copies is 1. Cancel a copy job To cancel a copy job, press Cancel on the product control panel. If more than one process is running, pressing Cancel clears the process that currently appears on the product control-panel display. NOTE: If you cancel a copy job, remove the document from the flatbed glass or from the automatic document feeder. 76 Chapter 9 Copy ENWW