HP Color LaserJet Enterprise CP4525 HP Color LaserJet Enterprise CP4020/CP4520 - Page 202
Control-panel messages continued, Tray size cannot be ANY SIZE/ANY
View all HP Color LaserJet Enterprise CP4525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
Table 10-1 Control-panel messages (continued) Description Recommended action 68.X PERMANENT STORAGE WRITE FAIL To continue press OK The product NVRAM is failing to write. Printing can continue, but some unexpected functions might occur if an error occurred in permanent storage. X values Press the OK button to clear the message. If the message is not cleared, turn the product off, and then turn the product on. If the message persists, contact HP support. See Customer support on page 246. ● 0 = Internal memory ● 1 = Removable disk 68.X STORAGE ERROR SETTINGS CHANGED To continue press OK One or more product settings are invalid and have been reset to the factory-default settings. Printing can continue, but some unexpected functions might occur if an error occurred in permanent storage. Press the OK button to clear the message. If the message is not cleared, turn the product off, and then turn the product on. If the message persists, contact HP support. See Customer support on page 246. 69.X ERROR To continue turn off then on A temporary printing error occurred. Turn the product off, and then turn the product on. If the message persists, contact HP support. See Customer support on page 246. 79.XXXX ERROR An internal product error has occurred. Turn the product off and then on. To continue turn off then on If the message persists, contact HP support. See Customer support on page 246. 8X.YYYY EIO ERROR This message appears in English only. It Replace the EIO card. indicates that the EIO card in slot X has failed. 8X.YYYY EMBEDDED JETDIRECT ERROR This message appears in English only. It indicates that the embedded HP Jetdirect card has failed. Contact HP support. See Customer support on page 246. ACCEPT BAD SIGNATURE? Yes press OK alternates with The product is performing a remote firmware Download the correct firmware upgrade file upgrade, and the code signature is invalid. for this product, and then reinstall the upgrade. See Product updates on page 177. ACCEPT BAD SIGNATURE? No press Access denied MENUS LOCKED The control-panel menu that you tried to select is currently locked. Consult with the person who administers the product. Action not currently available for tray x Tray size cannot be ANY SIZE/ANY CUSTOM Duplex registration is not available when the Configure the tray to a specific size, and then size is set to ANY SIZE or ANY CUSTOM. set the registration for that tray. BAD OPTIONAL TRAY CONNECTION The optional tray is not connected correctly. 1. Turn the product off. 2. Remove and then reinstall the optional tray. If the message persists, contact HP support. See Customer support on page 246. Bad Signature Upgrade cancelled The firmware upgrade code does not match Download the correct firmware upgrade file the product signature. for this product, and then reinstall the upgrade. See Product updates on page 177. 188 Chapter 10 Solve problems ENWW