HP Color LaserJet Enterprise CP4525 HP Color LaserJet Enterprise CP4020/CP4520 - Page 49

Table 2-1 Embedded Jetdirect menu (continued) Item Sub-item Sub-item PROXY SERVER PROXY PORT IPX/SPX IDLE TIMEOUT ENABLE FRAME TYPE APPLETALK DLC/LLC SECURITY ENABLE ENABLE SECURE WEB Sub-item Description Specifies the proxy server to be used by embedded applications in the product. A proxy server is typically used by network clients for Internet access. It caches Web pages, and provides a degree of Internet security, for those clients. To specify a proxy server, enter its IPv4 address or fully-qualified domain name. The name can be up to 255 octets. For some networks, you might need to contact your Internet Service Provider (ISP) for the proxy server address. Type the port number used by the proxy server for client support. The port number identifies the port reserved for proxy activity on your network, and can be a value from 0 to 65535. IDLE TIMEOUT: The time period, in seconds, after which an idle TCP print data connection is closed (default is 270 seconds, 0 disables the timeout). ON* ON: Enable the IPX/SPX protocol. OFF OFF: Disable the IPX/SPX protocol. AUTO* EN_8023 EN_II EN_8022 EN_SNAP Selects the frame-type setting for your network. AUTO: Automatically sets and limits the frame type to the first one detected. EN_8023, EN_II, EN_8022, and EN_SNAP are frame-type selections for Ethernet networks. ON* Configures an AppleTalk network. OFF ON* ON: Enable the DLC/LLC protocol. OFF OFF: Disable the DLC/LLC protocol. HTTPS REQUIRED* HTTPS OPTIONAL For configuration management, specify whether the embedded Web server will accept communications using HTTPS (Secure HTTP) only, or both HTTP and HTTPS. HTTPS REQUIRED: For secure, encrypted communications, only HTTPS access is accepted. The print server will appear as a secure site. HTTPS OPTIONAL: Access using either HTTP or HTTPS is permitted. ENWW Control panel menus 35