HP Color LaserJet Enterprise CP4525 HP Color LaserJet Enterprise CP4020/CP4520 - Page 211
Ram Disk File System Is Full, Ram Disk Is Write Protected
View all HP Color LaserJet Enterprise CP4525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 211 highlights
Table 10-1 Control-panel messages (continued) Description Recommended action Processing... The product is currently processing a job but is not yet picking pages. When paper motion begins, this message will be replaced by a message that indicates which tray the job is being printed from. No action is necessary. Processing... The product is processing a cleaning page. No action is necessary. CLEANING PAGE Processing... copy of The product is currently processing or printing collated copies. The message indicates that copy X of Y total copies is currently being processed. No action is necessary. Processing... from tray The product is actively processing a job from No action is necessary. the designated tray. RAM DISK DEVICE FAILURE The specified device has failed. Press the OK button to clear. To clear press OK RAM DISK FILE OPERATION FAILED To clear press OK A PJL file system command attempted to perform an illogical operation. Press the OK button to clear. RAM DISK FILE SYSTEM IS FULL To clear press OK A PJL file system command could not store Press the OK button to clear. something on the file system because the file system was full. RAM DISK IS WRITE PROTECTED To clear press OK The file system device is protected and no Press the OK button to clear. new files can be written to it. RAM DISK NOT INITIALIZED This file-storage component must be initialized before use. Use the HP Embedded Web Server or HP Web Jetadmin to initialize the component. Ready The product is online and ready for data. No No action is necessary. status or product attendance messages are pending at the display. Ready The product is online and ready. No action is necessary. IP ADDRESS Ready Diagnostics mode To exit press The product is in Diagnostics mode. To stop Diagnostic mode, press the Stop button . Receiving Upgrade A firmware upgrade is in progress. Do not turn the product off until the product returns to Ready. Remove all print cartridges To exit press The product is testing the transfer unit assembly. To perform the test, remove all the print cartridges. To cancel the test, press the stop button . Remove at least one print cartridge To exit press The product is testing the print-cartridge motor. To perform the test, remove at least one print cartridge. To cancel the test, press the stop button . REMOVE CARTRIDGE LOCKS At least one cartridge shipping lock was not 1. Open the front door. removed before you turned the product on. 2. Remove cartridge locks. ENWW Interpret control-panel messages 197