HP Color LaserJet Enterprise CP4525 HP Color LaserJet Enterprise CP4020/CP4520 - Page 50

Table 2-1 Embedded Jetdirect menu (continued) Item Sub-item Sub-item IPSEC Sub-item KEEP DISABLE* 802.1X RESET KEEP* RESET SECURITY YES NO* DIAGNOSTICS EMBEDDED TESTS LAN HW TEST YES NO* HTTP TEST YES NO* Description Specify the IPSec status on the print server. KEEP: IPSec status remains the same as currently configured. DISABLE: IPSec operation on the print server is disabled. Specify whether the 802.1X settings on the print server are reset to the factory defaults. RESET: The 802.1X settings are reset to the factory defaults. KEEP: The current 802.1X settings are maintained. Specify whether the current security settings on the print server will be saved or reset to factory defaults. YES: Security settings are reset to factory defaults. NO: The current security settings are maintained. This menu provides tests to help diagnose network hardware or TCP/IP network connection problems. Embedded tests help to identify whether a network fault is internal or external to the product. Use an embedded test to check hardware and communication paths on the print server. After you select and enable a test and set the execution time, you must select EXECUTE to initiate the test. Depending on the execution time, a selected test runs continuously until either the product is turned off, or an error occurs and a diagnostic page is printed. CAUTION: Running this embedded test will erase your TCP/IP configuration. This test performs an internal loopback test. An internal loopback test will send and receive packets only on the internal network hardware. There are no external transmissions on your network. Select YES to choose this test, or NO to not choose it. This test checks operation of HTTP by retrieving predefined pages from the product, and tests the embedded Web server. Select YES to choose this test, or NO to not choose it. 36 Chapter 2 Control panel menus ENWW