HP Color LaserJet Enterprise CP4525 HP Color LaserJet Enterprise CP4020/CP4520 - Page 218
Waiting For Tray <x> To Lift, Wrong Cartridge In <color> Slot
View all HP Color LaserJet Enterprise CP4525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
Table 10-1 Control-panel messages (continued) Description Recommended action USB ACCESSORY NOT FUNCTIONAL A USB accessory is not working correctly. 1. Turn product off. 2. Disconnect the USB accessory, and replace with a new USB accessory. USB ACCESSORY UNAVAILABLE To clear press OK The USB accessory is currently unavailable. To use the USB accessory, install the software for the USB accessory and turn the product off. Then, turn the product on with the accessory attached. USB STORAGE DEVICE FAILURE The specified device has failed. Press the OK button to clear. To clear press OK USB STORAGE FILE OPERATION FAILED A PJL file system command attempted to perform an illogical operation. To clear press OK Press the OK button to clear. USB STORAGE FILE SYSTEM IS FULL To clear press OK A PJL file system command could not store Press the OK button to clear. something on the file system because the file system was full. USB STORAGE IS WRITE PROTECTED To clear press OK The file system device is protected and no new files can be written to it. Press the OK button to clear. USB STORAGE NOT INITIALIZED This file-storage component must be initialized before use. Use the embedded Web server or HP Web Jetadmin to initialize the component. USED SUPPLY IN USE The print cartridge has been previously used. If you believe you purchased a genuine HP supply, go to www.hp.com/go/ anticounterfeit. WAIT FOR PRINTER TO REINITIALIZE This message can appear for a variety of reasons: No action is necessary. ● The RAM DISK settings changed before the product has restarted. ● The product is restarting after changing external device modes. ● Diagnostics has been exited. ● A new formatter has been installed with an old engine or a new engine has been installed with an old formatter. WAITING FOR TRAY TO LIFT The specified tray is lifting paper for feeding. No action is necessary. WARMING UP The product is coming out of Sleep mode. No action is necessary. WRONG CARTRIDGE IN SLOT The indicated slot for a print cartridge contains a cartridge that is not the correct color. From left to right, the print cartridges should be installed in this order: ● Yellow ● Magenta ● Cyan ● Black Remove the print cartridge from that slot, and install a cartridge that is the correct color. 204 Chapter 10 Solve problems ENWW