HP Color LaserJet Enterprise CP4525 HP Color LaserJet Enterprise CP4020/CP4520 - Page 52
Ping Results, Packets Sent
View all HP Color LaserJet Enterprise CP4525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Table 2-1 Embedded Jetdirect menu (continued) Item Sub-item Sub-item PRINT RESULTS Sub-item YES NO* EXECUTE PING RESULTS YES NO* PACKETS SENT PACKETS RECEIVED PERCENT LOST RTT MIN RTT MAX RTT AVERAGE PING IN PROGRESS REFRESH YES NO* YES NO* LINK SPEED Description If the ping test was not set for continuous operation, you can choose to print the test results. Select YES to print results. If you select NO, results are not printed. Specify whether to initiate the ping test. Select YES to initiate the test, or NO to not run the test. Use this item to view the ping test status and results using the control panel display. You can select the following items: Shows the number of packets (0 - 65535) sent to the remote host since the most recent test was initiated or completed. The default is 0. Shows the number of packets (0 - 65535) received from the remote host since the most recent test was initiated or completed. The default is 0. Shows the percent (0 to 100) of ping test packets that were sent with no response from the remote host since the most recent test was initiated or completed. The default is 0. Shows the minimum detected roundtrip-time (RTT), from 0 to 4096 milliseconds, for packet transmission and response. The default is 0. Shows the maximum detected roundtrip-time (RTT), from 0 to 4096 milliseconds, for packet transmission and response. The default is 0. Shows the average round-trip-time (RTT), from 0 to 4096 milliseconds, for packet transmission and response. The default is 0. Shows whether a ping test is in progress. YES indicates a test in progress, and NO indicates that a test completed or was not run. When viewing the ping test results, this item updates the ping test data with current results. Select YES to update the data, or NO to maintain the existing data. However, a refresh automatically occurs when the menu times out or you manually return to the main menu. The link speed and communication mode of the print server must match the network. The available settings depend on the product and installed print server. Select one of the following link configuration settings: CAUTION: If you change the link setting, network communications with the print server and network product might be lost. 38 Chapter 2 Control panel menus ENWW