HP Color LaserJet Enterprise CP4525 HP Color LaserJet Enterprise CP4020/CP4520 - Page 213

Table 10-1 Control-panel messages (continued) Description Recommended action REPLACE SUPPLY Printing black only At least one print cartridge has reached the very low condition and you have set the COLOR CARTRIDGES items to the PRINT IN BLACK option. The supply life remaining is used to determine if a supply is very low. The supply life remaining is an approximation only and varies depending on the types of documents printed and other factors. No action is required for printing to continue in black. To continue printing in color, either replace the print cartridge or reconfigure the product by using the MANAGE SUPPLIES menu on the control panel. For more information about ordering supplies, see Supplies and accessories on page 235. For more information about the MANAGE SUPPLIES menu, see Manage supplies menu on page 16. REPLACE TONER COLLECTION UNIT The product indicates when a toner collection unit is at its estimated end of life. The actual life remaining might be different than the estimation. Have a replacement toner collection unit available to install when print quality is no longer acceptable. The toner collection unit does not need to be replaced now unless the print quality is no longer acceptable. After a toner collection unit has reached its approximated end of life, HP's premium Protection Warranty on that toner collection unit ends. Replace the toner collection unit. If you wish to have the toner collection unit operate past its estimated capacity, configure the product to continue printing by using the MANAGE SUPPLIES menu. For more information about the MANAGE SUPPLIES menu, see Manage supplies menu on page 16. This is not a recommended option because of the risk of overfilling the toner collection unit, which could result in the need to service the product. REPLACE TRANSFER KIT The product indicates when a transfer kit is at its estimated end of life. The actual life remaining might be different than the estimation. Have a replacement transfer kit available to install when print quality is no longer acceptable. The transfer kit does not need to be replaced now unless the print quality is no longer acceptable. After a transfer kit has reached its approximated end of life, HP's premium Protection Warranty on that transfer kit ends. Replace the transfer kit. Instructions are included with the transfer kit. Request accepted please wait The product has accepted a request to print an internal page, but the current job must finish printing before the internal page will print. No action is necessary. Resend Upgrade The firmware upgrade was not completed successfully. Attempt upgrade again. Resetting kit count You have selected the option to reset the count for a new supply item. No action is necessary. Restoring factory settings The product is restoring factory settings. No action is necessary. Restoring... The product is restoring settings. Please wait until the process is complete. RESTRICTED FROM PRINTING IN COLOR This message appears when color printing is To enable color printing for the product, disabled for the product or when it is disabled change the RESTRICT COLOR USE setting for a particular user or print job. in the Manage supplies menu on page 16. ROM DISK DEVICE FAILURE The specified device has failed. Press the OK button to clear. To clear press OK ENWW Interpret control-panel messages 199