HP LaserJet 3200 HP LaserJet 3200m All-in-One Product - (English for Australia - Page 16
Hardware overview, Introduction
View all HP LaserJet 3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Hardware overview Place the product on a sturdy, level surface in a well-ventilated area that meets the following environmental requirements: l temperature: 15° to 32.5° Celsius (59° to 90.5° Fahrenheit) l humidity: 10% to 80% relative humidity (no condensation) l install away from direct sunlight, open flames, and ammonia fumes l install with enough space around the product to allow for proper access and ventilation, as shown in the figure below: 439 mm (17.3 inches) 395 mm (15.5 inches) 607 mm (23.9 inches) 14 Chapter 1 - Introduction EN
14
Chapter 1 - Introduction
EN
Hardware overview
Place the product on a sturdy, level surface in a well-ventilated area
that meets the following environmental requirements:
l
temperature: 15° to 32.5° Celsius (59° to 90.5° Fahrenheit)
l
humidity: 10% to 80% relative humidity (no condensation)
l
install away from direct sunlight, open flames, and ammonia
fumes
l
install with enough space around the product to allow for proper
access and ventilation, as shown in the figure below:
439 mm (17.3 inches)
395 mm (15.5 inches)
607 mm (23.9 inches)