HP LaserJet M9040/M9050 HP LaserJet M9040/M9050 MFP - Software Technical Refer - Page 174

Output tab features NOTE: Disabling Mopier Mode disrupts functionality for the Output and Finishing tab features. [INTERNAL] If the Mopier Mode setting on the Device Settings tab is changed to the Disabled option, the Output and Finishing tab features might not function as expected or might not function at all. For example, all the pages in a print job might be stapled together when they should be collated. NOTE: If the Job Separator setting on the Device Settings tab is changed to the Disabled option, the Job Separator button will not appear on the Output tab. Use the Output tab to select where and how the media exits the accessory output device, as well as to add job separator pages to a document. Figure 4-20 Output tab NOTE: The appearance of the Output tab will vary based on the installed accessory output device. The Output tab appears among the driver tabs only if an accessory output device (HP 3000-Sheet Stacker, HP 3000-Sheet Stapler/Stacker, HP Multifunction Finisher, or 8-bin Mailbox) is installed. 156 Chapter 4 HP PCL 5, PCL 6, and PS emulation drivers for Windows ENWW