HP LaserJet M9040/M9050 HP LaserJet M9040/M9050 MFP - Software Technical Refer - Page 280
Create a device group in HP Web Jetadmin, Remote firmware update by using the LPR command
View all HP LaserJet M9040/M9050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 280 highlights
7. If the name of the .RFU file is not listed in the All Available Images dialog box, click the Browse button in the Upload New Firmware Image dialog box and navigate to the location of the .RFU file that you downloaded from the Web at the start of this procedure. If the filename is listed, select it. 8. Click the Upload button to move the .RFU file from the hard drive to the HP Web Jetadmin server. After the upload is complete, the browser window refreshes. 9. Select the .RFU file from the Printer Firmware Update drop-down menu. 10. Click the Update Firmware button. The download process begins and the firmware is updated on the product. This can take several minutes. Let the process finish without further interaction with the product or the computer. The messages described in Control panel messages during the firmware update on page 264 appear on the product control panel. NOTE: The product automatically turns off and then on again to activate the update; this can happen more than once. At the end of the update process, the Ready message appears on the product control panel. Do not turn off the device or interfere with the update until you see this message. 11. When the Ready message appears on the product control panel, print a configuration page and verify that the firmware version number has changed. Also, print the menu map to view the product settings. Create a device group in HP Web Jetadmin HP Web Jetadmin V7.8 and later can also be used to perform multiple or unattended installations. Complete the following steps for multiple or unattended installations. 1. Start HP Web Jetadmin. 2. Create a device group. A simple way to do this is to follow these steps: a. Click the Device Management folder, and then click the All Devices option. b. Shift-click to select devices that are to be included in the group, and then click the OK button. c. When prompted, type a name for the new device group, and then click the OK button. 3. To modify several products in a group, click the group name, and then click the Open button. 4. The Device Group Tools drop-down menu appears on the right side of the window. Scroll if necessary to view it. 5. In the Device Group Tools drop-down box, select an action. Type the appropriate information. Click the Return to Device Group option when finished. Remote firmware update by using the LPR command Complete the following steps to update the product firmware by using the LPR command. 1. Print a configuration page and a menu map. Make note of the TCP/IP address of the product on the Embedded Jetdirect Page. The Embedded Jetdirect Page is the second page of the configuration page printout. Also, print a menu map before updating the firmware to see what user settings have been configured in the current firmware. 262 Chapter 6 Engineering details ENWW