HP StorageWorks 16-EL SAN Switch 2/16 version 3.1.x - Installation Guide
HP StorageWorks 16-EL - SAN Switch Manual
View all HP StorageWorks 16-EL manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 16-EL manual content summary:
- HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 1
installation guide hp StorageWorks SAN switch 2/16 version 3.1.x Product Version: 3.1.x Third Edition (June 2003) Part Number: AA-RR84C-TE This installation guide provides basic procedures for setting up, configuring, and managing the SAN Switch 2/16 and SAN Switch 2/16 power pak models. - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 2
UNIX® is a registered trademark of The Open Group. BROCADE, the Brocade B weave logo, Brocade: the Intelligent Platform for Networking Storage, SilkWorm, and additional warranty. Printed in the U.S.A. SAN Switch 2/16 Version 3.1.x Installation Guide Third Edition (June 2003) Part Number: AA-RR84C-TE - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 3
Conventions 11 Text Symbols 11 Equipment Symbols 12 Rack Stability 14 Getting Help 15 HP Technical Support 15 HP Storage Website 15 HP Authorized Reseller 16 1 Overview 17 SAN Switch 2/16 Features 18 Firmware 18 Hardware 19 SFP Media Side 20 Optical Ports 20 ISL Trunking 21 SFPs - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 4
in the Optional HP System/e Rack 40 Items Required for the HP System/e Rack 40 Installing the Switch Using the HP StorageWorks SAN Switch Universal Rack Mount Kit 46 Connecting AC Power 56 Power-On Self Test 57 Checking POST Results 58 Configuring Network Addressing 58 Requirements 58 Setting - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 5
IP and Fibre Channel Address 81 Displaying Devices within the Fabric 82 Checking the Firmware Version 82 Setting the Switch Date and Time 82 Displaying Switch or Restoring the Switch Firmware 88 Downloading Firmware from the HP Website 89 A Switch 2/16 Version 3.1.x Installation Guide 5 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 6
Requirements 102 Memory Specifications 103 Glossary 105 Index 117 Figures 1 SFP media side 20 2 Power supply side 21 3 Carton contents 25 4 Securing the inner slide rails to the switch 33 5 Attaching the rear rack mount brackets 34 6 Attaching the outer slide rails to the HP 9000 Series - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 7
Front Panel LED Patterns During Normal Operation 73 5 Rear Panel LED Patterns During Normal Operation 76 6 Physical Specifications 100 7 Power Supply Specifications 101 8 Environmental Requirements 102 9 Cabling Pinouts if Pin 7 is Used 103 SAN Switch 2/16 Version 3.1.x Installation Guide 7 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 8
Contents 8 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 9
this guide This installation guAidbe porouvitdetshinisforGmautioindtoehelp you set up and configure the HP StorageWorks SAN Switch 2/16. About this Guide About this Guide topics include: ■ Overview, page 10 ■ Conventions, page 11 ■ Rack Stability, page 14 ■ Getting Help, page 15 SAN Switch 2/16 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 10
configuring the switch via a supported Web browser Related Documentation For a list of related documents included with this product, see the Related Documents section of the HP StorageWorks SAN Switch 2/16 Version 3.1.x Release Notes. For the latest information, documentation and firmware releases - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 11
, and system responses (output and messages) Variables Website addresses Convention Blue text: Figure 1 Bold Italics Monospace font font text, for example: http://www.hp.com Text Symbols The following symbols may be found in the text of this guide. They have the following meanings. WARNING: - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 12
these symbols indicates the presence of electrical shock hazards. Enclosed area contains no operator serviceable parts. WARNING: To reduce the risk of personal injury from electrical shock hazards, , allow the surface to cool before touching. 12 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 13
About this Guide Power supplies or systems marked with these symbols indicate the presence of multiple sources of or damage to the equipment, observe local occupational health and safety requirements and guidelines for manually handling material. SAN Switch 2/16 Version 3.1.x Installation Guide 13 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 14
About this Guide Rack Stability Rack stability protects personnel and equipment. WARNING: To reduce the risk of personal injury or damage to the any time. A rack may become unstable if more than one rack component is extended for any reason. 14 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 15
Help If you still have a question after reading this guide, contact an HP authorized service provider or access our website: http://www.hp.com. HP Technical Support In North America, call technical support at 1-800-652-6672, available 24 hours a day, 7 days a week. Note: For continuous quality - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 16
About this Guide HP Authorized Reseller For the name of your nearest HP authorized reseller: ■ In the United States, call 1-800-345-1518. ■ In Canada, call 1-800-263-5868. ■ Elsewhere, see the HP website for locations and telephone numbers: http://www.hp.com 16 SAN Switch 2/16 Version 3.1.x - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 17
Notes for a complete list of management features enabled on your specific switch. Note: This guide refers to both models as the SAN Switch 2/16, unless otherwise noted. This chapter provides the following information: ■ SAN Switch 2/16 Features, page 18 ■ Firmware, page 18 ■ Hardware, page 19 SAN - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 18
the following sections for feature-specific information. Firmware The SAN Switch 2/16 operates using Fabric Operating System (FOS) firmware Version 3.1.x. (version as of this writing, please refer to the switch Release Notes for exact version number). The firmware supports: ■ An optional Security - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 19
supply - One Port Readiness LED on the back panel ■ Universal input power supplies with AC switches and built-in fans. (The power supplies plug into internal blind-mate connectors when installed in with a 10-year battery and 56 bytes of NVRAM. SAN Switch 2/16 Version 3.1.x Installation Guide 19 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 20
speed. The ports are capable of operating at 2.125 Gbps or 1.0625 Gbps. Each port conforms to the American National Standards Institute (ANSI) Fibre Channel, FC-PI specification for Fibre Channel SFP transceivers. 20 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 21
the combined bandwidth of up to four ISLs between two directly adjacent switches, while preserving in-order delivery. For specific information about ISL trunking, refer to the HP StorageWorks Trunking Version 3.1.x/4.1.x User Guide. SFPs The ports connect to SFP media. SFPs are universal and self - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 22
Kits HP provides the following optional hardware kits in support of the SAN Switch 2/16, see Table 2. Table 2: SAN Switch 2/16 Orderable Hardware Accessory Short wavelength SFP Long wavelength SFP, 10 km 2m LC-to-LC Fibre Channel (fc) cable 2m LC-to-LC multi-mode fc cable 16m LC-to-LC fc cable - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 23
EIA Rack, page 31 ■ Installing the Switch in the Optional HP System/e Rack, page 40 ■ Installing the Switch Using the HP StorageWorks SAN Switch Universal Rack Mount Kit, page 46 ■ Connecting AC Power, page 56 ■ Configuring Network Addressing, page 58 ■ Connecting the Switch to the LAN, page 62 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 24
Unpack the shipping cartons. Note: The Rack Mount Kit shown in Figure 3 and Table 3 may not represent the kit that shipped with your switch. HP reserves the right to substitute Rack Mount Kits, providing applicable instructions with each switch. 24 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 25
Installing the SAN Switch 2/16 2 3 1 5 4 6 Figure 3: Carton contents SHR-2489A SAN Switch 2/16 Version 3.1.x Installation Guide 25 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 26
to an RJ-45 connector, by removing the adapter on the end of the cable) HP StorageWorks SAN Switch 2/16 *Rack Mount Kit containing: Slide Assembly, includes one Inner and one Outer Slide not represent the rail kit that shipped with your switch. 26 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 27
System/e rack. For instructions, see Installing the Switch in the Optional HP System/e Rack, page 40. ■ As a fixed component using the optional HP StorageWorks SAN Switch Universal Rack Mount Kit. For instructions, see Installing the Switch Using the HP StorageWorks SAN Switch Universal Rack Mount - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 28
is drawn into the switch chassis by the fans side). HP cautions that you must install the switch so switch uses ambient air for cooling. Power Requirements Two AC power cords connect to the switch switch has a universal power supply capable of functioning worldwide without voltage jumpers or switches - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 29
Installing the SAN Switch 2/16 Electrostatic Discharge Precautions To prevent electrostatic damage, observe the following precautions: ■ Avoid ■ Always make sure you are properly grounded when touching a static-sensitive component or assembly. SAN Switch 2/16 Version 3.1.x Installation Guide 29 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 30
steps 3 through 5 for the remaining power supply. Note: Do not connect the switch to the network until the IP address is correctly set. For instructions on how to set the IP address, see "Configuring Network Addressing" later in this chapter. 30 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 31
Installing the Slide Rail Assemblies to the Switch The Rack Mount Kit supplied with the switch consists of two slide rail assemblies consisting of an inner slide rail attached to an outer slide rail. Read the following sections for complete instructions on first separating, then installing the slide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 32
same direction. a. HP recommended method: To allow the port side of the switch to slide out the switch. 2. Locate three Phillips head, 8-32 x 3/16-inch screws provided in the Rack Mount Kit. Secure the inner slide rail to the switch, see Figure 4. 32 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 33
the port side of the switch slides out the back of the HP 9000 Series rack. (For example, the switch should face the aisle where exhaust air is released. Air intake and exhaust for all components in the rack should flow in the same direction.) SAN Switch 2/16 Version 3.1.x Installation Guide 33 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 34
switch. The rear rack mount brackets act as "stops" to prevent the switch from sliding out the rear of the rack. Use these steps if you installed the inner slide rails to the switch using the procedure outlined in "Attaching the Inner Slide Rails to the Switch bracket to the switch, see Figure - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 35
rails in the HP 9000 Series Rack. Obtain the following items, located in the Rack Mount Kit: ■ Four 3-hole bar nuts ■ Eight Phillips head 8-32 x 3/8-inch screws ■ Eight square alignment washers ■ # 2 Phillips screwdriver with torque capability SAN Switch 2/16 Version 3.1.x Installation Guide 35 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 36
necessary to attach the outer rails to the HP 9000 Series Rack. 1. Determine the appropriate placement for the switch inside the HP 9000 Series or EIA Rack. Note: The HP 9000 Series rack's rails are divided into the outer slide rail, see Figure 6. 36 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 37
as described in step 3. The square alignment washers are mandatory for proper switch alignment. 7. Secure each L-bracket and 3-hole bar nut to the Adjust the size of the outer graphic frame as required. Delete this set of instructions 1 5 1 Phillips head 10-32 x 3/8-inch screw 2 3-hole bar nut - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 38
the SAN Switch 2/16 outer slide rail. Sliding the Switch into an HP 9000 Series or EIA Rack Follow these steps to install the switch in the rack. WARNING: During . 2. Carefully lift the switch into the rear of the rack, inserting the inner slide rails (attached to the switch) into the outer slide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 39
rack mount bracket to the rack rails. 3. Tighten the screws, and torque to 25-inch pounds. 4. See the "Connecting AC Power" on page 56 for instructions on applying power to the switch. SAN Switch 2/16 Version 3.1.x Installation Guide 39 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 40
Switch 2/16 Installing the Switch in the Optional HP System/e Rack This section provides instructions for installing the switch in the HP System/e rack. Items Required for the HP System/e Rack The HP System/e Rack Kit consists of the following items: ■ HP Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 41
to exhaust at the rear of the rack, similar to other rack-mounted equipment. This prevents switch overheating, which may cause it to fail. Use these steps to install the switch in the HP System/e rack. 1. Verify that all required hardware is available. 2. Choose a mounting location in the rack for - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 42
Installing the SAN Switch 2/16 4. Install two M5 U-type Tinnerman clips for each of the front columns of the rack in the top and bottom portion of the outer rail flush against the rear rail-tray brackets. Install them as shown in Figure 10. 42 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 43
illustration as required. [8] Adjust the size of the outer graphic frame as required. Delete this set of instructions 1 2 1 Rubber washer (1 of 2) 2 Rear rail tray bracket (1 of 2) Figure 10: upper left and the lower right screws until later. SAN Switch 2/16 Version 3.1.x Installation Guide 43 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 44
2/16 1 2 SHR-2560A 1 Outer rail alignment pins 2 M5 torx screws Figure 11: Assembling the outer rails (HP rack) 7. Assemble the two inner rails (one on each side) to the switch using (6) #8-32 x 5/16 Phillips pan-head screws, and #8 flat washer as shown in Figure 12. Figure 12: Assembling - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 45
the two remaining M5 Torx screws to complete the installation. See Figure 13. Figure 13: Installing switch into the HP rack SHR-2583 10. See the next section, "Connecting AC Power" on page 56, for instructions on applying power to the switch. SAN Switch 2/16 Version 3.1.x Installation Guide 45 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 46
the SAN Switch 2/16 Installing the Switch Using the HP StorageWorks SAN Switch Universal Rack Mount Kit This section provides instructions for installing the SAN Switch 2/16 in an HP rack using the Universal Rack Mount Kit, part number 331148-B21. The following items are required: ■ SAN Switch 2/16 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 47
1/4 flat washer Caution: For proper airflow, the SFP media side of the SAN Switch 2/16 must face the rear of the rack. This mounting allows air to enter to other rack-mounted equipment. This prevents switch overheating, which may cause it to fail. To install the switch in a rack: 1. Check contents of - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 48
Phillips pan-head screws with captive star lock washers and (2) #10 adapter washers as shown in Figure 14. Figure 14: Installing the rear mounting brackets (HP 9000 Series or comparable EIA rack) 48 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 49
brackets with (2) #10-32 x 1/2-inch Phillips pan-head screws and (2) #10 alignment washers as shown in Figure 15. Figure 15: Installing the rear mounting brackets (HP System/e rack-left rear upright) SAN Switch 2/16 Version 3.1.x Installation Guide 49 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 50
Installing the SAN Switch 2/16 Note: This kit contains both left rails and right rails. The rails are marked tighten them. The nuts will be tightened later in step 8. Figure 16: Installing the outer rails (HP 9000 Series or comparable EIA rack) 50 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 51
and two #10 adapter washers in the upper and lower hole locations of the left rail. See Figure 17. Figure 17: Assembling the outer rails (HP 9000 Series or comparable EIA rack) SAN Switch 2/16 Version 3.1.x Installation Guide 51 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 52
Installing the SAN Switch 2/16 - For an HP System/e rack, install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock hole locations of the left rail. See Figure 18. Figure 18: Assembling the outer rails (HP System/e rack) 52 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 53
three SAN switches-SAN Switch 2/32, SAN Switch 2/16, and SAN Switch 2/8. The rails on a switch. For example, to install the inner rails on the SAN Switch 2/16, use switch requires a different number of these screws. For example, Figure 19 shows the an inner rail being attached to the SAN Switch - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 54
x 1/2-inch Phillips pan-head screws with captive star lock washers with one on each side. See Figure 20 and Figure 21. Figure 20: Installing the switch into a rack (HP 9000 Series or comparable EIA rack) 54 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 55
a rack (HP System/e rack) 8. Tighten the nuts installed in step a of step 4 on page 50. Note: To uninstall a switch, remove the middle #10-32 x 1/2-inch Phillips pan head screw with captive star lock washer from either side of the rack uprights. SAN Switch 2/16 Version 3.1.x Installation Guide 55 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 56
clips ship with the Slide Rail Assembly Kit only. If using the slide rail assembly kit supplied with the switch: Locate the six power cord clips, three on each side of the outer slide rails. See Figure 6, all the tabs are on the same side. 56 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 57
power on, the O position indicates power off). The switch automatically runs POST. Caution: Do not connect the switch to the network until the IP address is correctly set. For instructions on setting the IP address, see "Configuring Network Addressing," on page 58. Power-On Self Test Each time - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 58
to the HP StorageWorks Fabric OS Version 3.1.x/4.1.x Reference Guide. Configuring Network Addressing Read the following sections for information on how to configure addressing for the switch. Requirements The following items are required to set network addressing. ■ An IP address from your Network - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 59
switch IP address, subnetmask, or gateway address. Note: During first-time setup, you must replace the factory IP, subnetmask, and gateway addresses with addresses the RJ-45 connector to create a Serial connection. 4. Verify that the switch power is on and POST is completed. See the "Power-On Self - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 60
7. Log onto the switch (with administrative privileges). The default administrative logon is admin and the default password is password. a. Enter the following at the prompt: ipAddrSet b. Enter the following information at the corresponding prompts listed below: - Ethernet IP Address [10.77.77.77 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 61
only for use during the initial setting of the IP address and for service purposes. Using the Serial port during normal switch operation or for regular maintenance is not recommended. 8. Record the IP address on the label affixed to the switch. SAN Switch 2/16 Version 3.1.x Installation Guide 61 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 62
. Verify that the switch is not accessed from any other connections during the remaining steps. 4. Log on to the switch with administrative privileges by telnet. The default administrative logon is admin and the default password is password. 62 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 63
to specifying the physical switch and port a device is attached to in data networks. It is not analogous to an IP address. PID formats are assigned by a Fibre Channel switch when a device logs 0, depending on the number displayed in the brackets. SAN Switch 2/16 Version 3.1.x Installation Guide 63 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 64
on page 62 for instructions on connecting Fibre Channel cables. 11. If necessary, type cfgEnable to re-establish zoning. Note: Once the switch PID format is set, it is stored in the flash memory of the switch, and it is NOT necessary to set it again during subsequent firmware upgrades. 64 SAN - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 65
The default domain ID is 1. If the default domain ID is already in use when the switch is connected to the fabric, the domain ID for the new switch is a unique domain ID (such as the domain ID used by the previous switch, if still available). Domain: (1..239) [1] 3 5. Complete the remaining - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 66
to connect the SFPs and cables to switch ports as required. Note: The ports and cables used in trunking groups must meet specific requirements. For a list of these requirements, refer to the HP StorageWorks ISL Trunking Version 3.1.x/4.1.x User Guide. 1. Remove the shipping plug from the appropriate - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 67
to verify that the switch is running properly. 1. Access your browser. 2. At the URL address window, type http://your switch IP address. 3. If connected properly, the name of your switch appears (in green) at the prompt, indicating Healthy/OK. SAN Switch 2/16 Version 3.1.x Installation Guide 67 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 68
if required for a replacement switch. For instructions on how to back up switch. See the "Setting Network Addresses via a Serial Connection" earlier in this chapter, to make a Serial connection through a workstation and to set the IP address. 68 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 69
default domain setting is 1. Note: If a switch boot failure occurs, the switch must be taken offline for repair or replacement. Contact your HP Technical Support for assistance. 5. Power off the new switch and connect one Fibre Channel cable from the SAN to the new switch. Next Steps Specific tasks - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 70
your network components for specific requirements. See the HP StorageWorks Fabric OS Version 3.1.x/4.1.x Procedures User Guide for a detailed command description. Cascading Switches The Domain ID number uniquely identifies a switch in a fabric. Normally, the switch automatically assigns the Domain - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 71
Managing the SAN Switch 2/16 3 This chapter covers the following topics: ■ Interpreting LED Activity, page 72 ■ Management Overview, page 78 ■ Running Basic Switch Operations Using Telnet, page 79 ■ Diagnostic Tests, page 84 SAN Switch 2/16 Version 3.1.x Installation Guide 71 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 72
does not indicate a problem. Note: Any errors related to LED activity are listed in the error log. For information about the error log, refer to the HP StorageWorks Fabric OS Version 3.1.x/4.1.x Procedures Guide. Front Panel LEDs The front panel includes the following LEDs: ■ One Switch Power LED on - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 73
no traffic. The port is online but segmented, indicating a loopback cable or incompatible switch. The port is in internal loopback (diagnostic). Port is online, with traffic flowing . No action required. Reset the switch from a management station. SAN Switch 2/16 Version 3.1.x Installation Guide 73 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 74
Managing the SAN Switch 2/16 Table 4: Front Panel LED Patterns During Normal Operation (Continued) LED at 1 Gbps. The port is transmitting/receiving at 2 Gbps. Recommended Action Reset the switch from a management station. Reset the port from a management station. No action required. No action - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 75
Action Verify that the switch is on and boot has had time to complete. If there is still no light, contact the switch supplier. No action required. Errors may be listed in the error log. Refer to the HP StorageWorks Fabric OS Version 3.1.x/4.1.x Procedures Guide for more information. SAN - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 76
failed. Recommended Action Verify power supply is on and power cable is connected to a valid power source. No action required. Verify that the switch is on and boot had time to complete. If there is still no light, contact the switch supplier. 76 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 77
LED Color Hardware Recommended LED Location Display Status Action Steady green Switch is on and boot has successfully completed. No action required Refer to the HP StorageWorks Fabric OS Version 3.1.x/4.1.x Procedures Guide for more information. SAN Switch 2/16 Version 3.1.x Installation - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 78
Managing the SAN Switch 2/16 Management Overview The switch is managed using TCP/IP protocol, in-band over Fibre Channel , switch, or port. For more information refer to the HP StorageWorks Web Tools Version 3.1.x/4.1.x User Guide. Optional Management Features Refer to the HP StorageWorks SAN Switch - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 79
the switch firmware, but switch operations. Logging into the Switch Use these steps to log into the switch. 1. Open a telnet connection to the switch. The login prompt displays if the telnet connection successfully found the switch in the network. SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 80
the SAN Switch 2/16 Note: The switch must be connected to your IP network through the user: password: xxxxxx The default password is password. 4. If the login was successful, a prompt displays showing the switch name and user ID you are length. 80 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 81
the configuration to the firmware. Configuring the IP and Fibre Channel Address The SAN Switch 2/16 is shipped with a default IP address of 10.77.77.77. Use these steps to change the default IP Address and configure the Fibre Channel IP address of the switch. 1. Log in to the switch as the admin - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 82
displays all the connected devices in the fabric. Checking the Firmware Version Use these steps to display the firmware version. 1. Log in to the switch as the admin user. 2. At the command line, 00-59. - YY is the year, valid values are 00-99. 82 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 83
values greater than 69 are interpreted as 1970-1999; year values less than 70 are interpreted as 2000-2069. The date function does not support daylight saving time or time zones. Displaying Switch Configuration Settings Use these steps to display the system configuration settings. 1. Log into the - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 84
about error messages, refer to the HP StorageWorks Fabric OS Procedures Version 3.1.x/4.1.x User Guide. Diagnostic Tests Diagnostic tests are provided to help troubleshoot the hardware and the firmware. The diagnostic tests provided on the switch include tests of internal connections and circuitry - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 85
the Configuration and Upgrading Firmware 4 This chapter covers the following topics: ■ Backing Up System Configuration Settings, page 86 ■ Upgrading or Restoring the Switch Firmware, page 88 ■ Downloading Firmware from the HP Website, page 89 SAN Switch 2/16 Version 3.1.x Installation Guide 85 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 86
) or the FTP service (on a Windows or UNIX machine) is running on the host workstation. 2. Log into the switch as the admin user. 3. At the command line enter the following command: configUpload hostIPaddr user path_filename password For example, hostIPaddr is the IP address of the host computer - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 87
as the admin user. 3. Shut down the switch by entering the following command: switchDisable 4. At the command line, enter the following command: configDownload "hostIPaddr", "user", "path_filename","password" For example, hostIPaddr is the IP address of the host computer, user is the User ID used - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 88
or the FTP service (on a Windows or UNIX machine) is running on the host workstation. 2. Log into the switch as the admin user. 3. At the command line, enter the following command: firmwareDownload hostIPaddr, user, path_filename, password For example, where hostIPaddr is the IP address of the host - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 89
and Upgrading Firmware Downloading Firmware from the HP Website To download the firmware from the HP website, go to http://www.hp.com. The website contains the required loaders and instructions for downloading the firmware to a switch. SAN Switch 2/16 Version 3.1.x Installation Guide 89 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 90
Backing Up the Configuration and Upgrading Firmware 90 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 91
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a could void the user's authority to operate the equipment. SAN Switch 2/16 Version 3.1.x Installation Guide 91 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 92
Declaration Schalldruckpegel Lp = 46.1 dB(A)Am Arbeitsplatz (operator position) Normaler Betrieb (normal operation)Nach ISO 7779:1999 (Typprüfung) VCCI EMC Statement (Japan) 92 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 93
Harmonics Conformance (Japan) BSMI EMC Statement (Taiwan) Regulatory Compliance Notices RRL EMC Statement (Korea) SAN Switch 2/16 Version 3.1.x Installation Guide 93 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 94
as a Class 1 Laser product, conforming to the requirements contained in Department Of Health and Human Services (DHHS) regulation 21 CFR, Subchapter J. The certification is indicated by a label on the metal established by the IEC and U.S. DHHS. 94 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 95
replacement or proper disposal, contact your HP authorized reseller or your authorized service provider. WARNING: Your switch contains an internal lithium manganese dioxide system or return them to HP, your authorized HP partners, or their agents. SAN Switch 2/16 Version 3.1.x Installation Guide 95 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 96
Regulatory Compliance Notices 96 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 97
them from their containers. ■ Avoid touching pins, leads, or circuitry. ■ Always make sure you are properly grounded when touching a static-sensitive component or assembly. SAN Switch 2/16 Version 3.1.x Installation Guide 97 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 98
conductive field service tools. ■ Use a portable field service kit with HP authorized reseller install the part. Note: For more information on static electricity, or for assistance with product installation, contact your HP authorized reseller. 98 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 99
Technical Specifications This appendix covers the following topics: ■ Dimensions, page 100 ■ Power Supply Specifications, page 101 ■ Environmental Requirements, page 102 ■ Memory Specifications, page 103 C SAN Switch 2/16 Version 3.1.x Installation Guide 99 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 100
2/16 dimensions. Table 6: Physical Specifications Height Dimension Depth Width Weight (with both power supplies) Value 1.72 +/- 0.01 inches (4.37 +/- 0.03 cm) 24.5 +/- 0.03 inches (62.2 +/- 0.1cm) 17 inches (43.2 cm) 28.0 lbs (12.7 kg) 100 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 101
air towards the front of the switch. Table 7: Power Supply Specifications Specification Outlet Total power available from each power supply Max. switch power Input voltage Input line usec - hot/cold start Fused in both hot & neutral lines . SAN Switch 2/16 Version 3.1.x Installation Guide 101 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 102
Specifications Environmental Requirements Table 8 lists the environmental ranges that are acceptable when the switch is operating, and the acceptable ranges when the switch is 5G, 0-3 kHz at 1.0 octave/minute 10G, 0-5kHz at 1.0 octave/minute 102 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 103
Specifications Memory Specifications The switch utilizes the following memory. ■ Main Memory (SDRAM): 32 MB per switch ■ Flash Memory: Dual 8 MB ■ Boot Flash: 512K bytes of 8-bit for system boot The centralized memory maximizes the overall switch configure the switch IP address without connecting - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 104
Technical Specifications 104 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 105
applications to interface with a set of services. Arbitrated Loop A shared 100 MBps or 200 MBps Fibre Channel transport structured as a loop. Can support up to 126 devices and one fabric attachment. See also Topology. ASIC Application Specific Integrated Circuit. ATM Asynchronous Transfer Mode - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 106
is seven. See also Fabric, ISL. Chassis The metal frame in which the switch and switch components are mounted. Circuit An established communication path between two ports. Consists of two as through telnet or SNMP, and does not involve a GUI. 106 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 107
frames. Usually automatically assigned by the switch, but can be manually assigned. E_D_TOV Error Detect Time-out services to manage the exchange of frames across the fabric between source and destination. See also End-to-end Flow Control, BB_Credit. SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 108
switched fabric. See also Topology, SAN, Cascade. FC-AL-3 The Fibre Channel Arbitrated Loop standard defined by ANSI. Defined on top of the FC-PH standards. FC- protocol service that supports communication between Fibre Channel service providers. 108 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 109
yet assumed a specific function in the fabric. Gateway A device such as a switch that connects different subnets together. A switch can be used as a gateway from the Ethernet to the Fibre Channel. Set the gateway address on one switch to the Fibre Channel IP address of another switch to enable the - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 110
synchronization. ISL Interswitch Link; a Fibre Channel link from the E_Port of one switch to the E_Port of another. See also E_Port, Cascade. Isolated E_Port An a frame, from the time it is sent until it arrives. Link Services A protocol for link-related actions. Link As applies to Fibre Channel, - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 111
the ports on the network). Multimode A fiber optic cabling specification that allows up to 500 meters between devices. N_Port Node connection. NAA Network Address Authority. An identifier that indicates the format of a network address. Name Server Switch 2/16 Version 3.1.x Installation Guide 111 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 112
a series of tests run by a switch after it is turned on. Private Device A device that supports arbitrated loop protocol and can interpret 8-bit addresses, but cannot log into the fabric. communicate with either private or public NL_Ports. 112 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 113
support 20-bit addresses (or has 20-bit phantom addresses created for it by the switch communication path between two switches. May also apply to the specific path taken by an individual frame Service Rate The rate at which an entity can service requests. SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 114
IP, because it does not rely on the underlying communication protocols. Switch Name The arbitrary name assigned to a switch. Switch Port A port on a switch. Switch ports can be E_Ports, F_Ports, or FL_Ports. Switch devices across the fabric. 114 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 115
, IP, HIPPI, and IPI. Well-known Address As pertaining to Fibre Channel, a logical address defined by the Fibre Channel standards as assigned to a specific function, and stored on the switch. the XMITTED CLOSE state cannot attempt to arbitrate. SAN Switch 2/16 Version 3.1.x Installation Guide 115 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 116
of the fabric into logical groupings of devices. Devices in a zone can only access and be accessed by devices in the same zone. 116 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 117
index A ac power cord 28 airflow direction through switch 19 authorized reseller, HP 16 automatic self-discovery 18 B back panel prerequisites 10 related documentation 10 domain address 69 domain ID 70 configuring 65 default 65 domain IDs 65 SAN Switch 2/16 Version 3.1.x Installation Guide 117 - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 118
addressing 58 NVRAM 19 O optical ports LEDs 72 outer slide rails 35 P physical dimensions of switch 100 port ethernet port 19 LED for port speed 72 LED for port status 72 serial port 19 speed 20 positioning the switch inside the rack 39 POST 57, 58 SAN Switch 2/16 Version 3.1.x Installation Guide - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 119
16 Version 3.1.x Installation Guide Index separating inner rail from outer rails 31 serial port cabling pinouts 103 setting network addressing via serial port 59 setting the IP address 61 setting the switch date and time 82 SFPs 66 SNMP 78 SNMP, managing by 78 specifications power supply 101 square - HP StorageWorks 16-EL | SAN Switch 2/16 version 3.1.x - Installation Guide - Page 120
Index W warning rack stability 14 symbols on equipment 12 web tools 78 websites HP storage 15 weight, switch 100 Z zoning summary 18 120 SAN Switch 2/16 Version 3.1.x Installation Guide
installation
guide
hp
StorageWorks
SAN switch 2/16
version 3.1.x
Product Version:
3.1.x
Third Edition (June 2003)
Part Number:
AA-RR84C-TE
This installation guide provides basic procedures for setting up, configuring, and managing
the SAN Switch 2/16 and SAN Switch 2/16 power pak models.