HP StorageWorks 16-EL SAN Switch 2/16 version 3.1.x - Installation Guide - Page 82
Displaying Devices within the Fabric, Checking the Firmware Version, Setting the Switch Date and Time
View all HP StorageWorks 16-EL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Managing the SAN Switch 2/16 Displaying Devices within the Fabric To verify that you have fabric-wide connectivity when you install a new switch, display the fabric-wide device count from the newly installed switch. Use these steps to display the fabric. 1. Log in to the switch as the admin user. 2. At the command line, enter the following command: nsAllShow This command displays all the connected devices in the fabric. Checking the Firmware Version Use these steps to display the firmware version. 1. Log in to the switch as the admin user. 2. At the command line, enter the following command: version This command displays the Kernel version, and Fabric OS release number. Setting the Switch Date and Time All switches maintain current date and time in non-volatile memory. Date and time are used for logging events. Switch operation does not depend on the date and time; a switch with an incorrect date and time value still functions properly. Uses these steps to set the date and time of a switch. 1. Log into the switch as the admin user. 2. At the command line, enter the following command: date "MMDDhhmmYY" where: - MM is the month, valid values are 01-12. - DD is the date, valid values are 01-31. - hh is the hour, valid values are 00-23. - mm is minutes, valid values are 00-59. - YY is the year, valid values are 00-99. 82 SAN Switch 2/16 Version 3.1.x Installation Guide