HP StorageWorks 16-EL SAN Switch 2/16 version 3.1.x - Installation Guide - Page 37
Attaching the outer slide rails to the HP 9000 Series rack, proper switch alignment.
View all HP StorageWorks 16-EL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Installing the SAN Switch 2/16 Note: Position the square alignment washers onto the Phillips head 10-32 x 3/8-inch screws, as described in step 3. The square alignment washers are mandatory for proper switch alignment. 7. Secure each L-bracket and 3-hole bar nut to the rack's rails with two Phillips head 10-32 x 3/8-inch screws (and attached square alignment washers), see Figure 6. [1] Select this graphic frame. 4 [2] Select File. [3] Select Import. [4] [5] CSehloeoc3steFitlhee. appropriate graphic file name. [6] Make sure you've checked the Copy Into Document. [7] Select Import. Position the illustration as required. 2 [8] Adjust the size of the outer graphic frame as required. Delete this set of instructions 1 5 1 Phillips head 10-32 x 3/8-inch screw 2 3-hole bar nut 3 Outer slide rail SHR-2478A 4 L-Brackets 5 Power cord clip (1 of 6) Figure 6: Attaching the outer slide rails to the HP 9000 Series rack SAN Switch 2/16 Version 3.1.x Installation Guide 37