HP StorageWorks 16-EL SAN Switch 2/16 version 3.1.x - Installation Guide - Page 26
Table 3: Shipping Carton Contents, One HP StorageWorks SAN Switch
View all HP StorageWorks 16-EL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Installing the SAN Switch 2/16 Table 3: Shipping Carton Contents Item Number 1 2 3 4 5 6 Description One HP StorageWorks SAN Switch 2/16 product accessory bag containing CD, license, documentation Two standard AC power cords and two PDU cords One RS-232 Serial cable (convertible to an RJ-45 connector, by removing the adapter on the end of the cable) HP StorageWorks SAN Switch 2/16 *Rack Mount Kit containing: Slide Assembly, includes one Inner and one Outer Slide Rail, with the following items preinstalled: • L-Bracket, Slide Mount, 3-hole (4) • Power Cord Clips (6) Pouch containing Rack Mount hardware: • 3-hole Bar Nuts (4) • 10-32 x 3/8-inch Phillips pan-head screws (10) • 8-32 x 3/16-inch Phillips pan-head screws (10) • Square alignment washers (8) • Right and left rear rack mount brackets (2); use if installing so that port side slides from the rear • Right and left front mount brackets (2); use if installing so that power supply end slides out from the front of the rack • Rubber mounting feet (4); use if installing on a flat surface * Depending on time of purchase, the Fixed Rack Mount Kit items listed in Table 3 may not represent the rail kit that shipped with your switch. 26 SAN Switch 2/16 Version 3.1.x Installation Guide