HP StorageWorks 16-EL SAN Switch 2/16 version 3.1.x - Installation Guide - Page 42
Installing the tinnerman clips, As an aid in assembly
View all HP StorageWorks 16-EL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Installing the SAN Switch 2/16 4. Install two M5 U-type Tinnerman clips for each of the front columns of the rack in the top and bottom positions of the three-hole pattern as shown in Figure 9. Figure 9: Installing the tinnerman clips 5. Assemble the outer rails by completing the following steps: a. As an aid in assembly, two rubber washers have been included to help keep the rear slotted portion of the outer rail flush against the rear rail-tray brackets. Install them as shown in Figure 10. 42 SAN Switch 2/16 Version 3.1.x Installation Guide
Installing the SAN Switch 2/16
42
SAN Switch 2/16 Version 3.1.x Installation Guide
4.
Install two M5 U-type Tinnerman clips for each of the front columns of the
rack in the top and bottom positions of the three-hole pattern as shown in
Figure 9
.
Figure 9:
Installing the tinnerman clips
5.
Assemble the outer rails by completing the following steps:
a.
As an aid in assembly, two rubber washers have been included to help
keep the rear slotted portion of the outer rail flush against the rear rail-tray
brackets. Install them as shown in
Figure 10
.