HP StorageWorks 16-EL SAN Switch 2/16 version 3.1.x - Installation Guide - Page 61
Record the IP address on the label affixed to the switch.
View all HP StorageWorks 16-EL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Installing the SAN Switch 2/16 c. To verify that the IP address was entered correctly, type: ipAddrShow d. Once the IP address is verified as correct, remove the Serial cable, and replace the shipping plug in the Serial port. Caution: The Serial port is intended only for use during the initial setting of the IP address and for service purposes. Using the Serial port during normal switch operation or for regular maintenance is not recommended. 8. Record the IP address on the label affixed to the switch. SAN Switch 2/16 Version 3.1.x Installation Guide 61
Installing the SAN Switch 2/16
61
SAN Switch 2/16 Version 3.1.x Installation Guide
c.
To verify that the IP address was entered correctly, type:
ipAddrShow
d.
Once the IP address is verified as correct, remove the Serial cable, and
replace the shipping plug in the Serial port.
Caution:
The Serial port is intended only for use during the initial setting of
the IP address and for service purposes. Using the Serial port during normal
switch operation or for regular maintenance is not recommended.
8.
Record the IP address on the label affixed to the switch.