HP StorageWorks 16-EL SAN Switch 2/16 version 3.1.x - Installation Guide - Page 62
Connecting the Switch to the LAN, Connecting the Ethernet cable
View all HP StorageWorks 16-EL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Installing the SAN Switch 2/16 Connecting the Switch to the LAN Use the following steps to connect the switch to the Ethernet Local Area Network (LAN) segment. 1. Remove the shipping plug from the Ethernet port. 2. Connect one end of an Ethernet cable to the Ethernet port, see Figure 24. Figure 24: Connecting the Ethernet cable SHR-2550A 3. Connect the other end of the Ethernet cable to the workstation or to an Ethernet network containing the workstation. Note: You can now access the switch remotely (and from multiple connections), using telnet or the Web Tools application. Verify that the switch is not accessed from any other connections during the remaining steps. 4. Log on to the switch with administrative privileges by telnet. The default administrative logon is admin and the default password is password. 62 SAN Switch 2/16 Version 3.1.x Installation Guide