HP StorageWorks 16-EL SAN Switch 2/16 version 3.1.x - Installation Guide - Page 52
Assembling the outer rails (HP System/e rack), the left rail. See
View all HP StorageWorks 16-EL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Installing the SAN Switch 2/16 - For an HP System/e rack, install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and two #10 alignment washers in the upper and lower hole locations of the right rail. Then install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers and two #10 alignment washers in the upper and lower hole locations of the left rail. See Figure 18. Figure 18: Assembling the outer rails (HP System/e rack) 52 SAN Switch 2/16 Version 3.1.x Installation Guide
Installing the SAN Switch 2/16
52
SAN Switch 2/16 Version 3.1.x Installation Guide
—
For an HP System/e rack, install two #10-32 x 1/2-inch Phillips pan-head
screws with captive star lock washers and two #10 alignment washers in
the upper and lower hole locations of the right rail. Then install two
#10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers
and two #10 alignment washers in the upper and lower hole locations of
the left rail. See
Figure 18
.
Figure 18:
Assembling the outer rails (HP System/e rack)