HP StorageWorks 16-EL SAN Switch 2/16 version 3.1.x - Installation Guide - Page 54
Installing the switch into a rack (HP 9000 Series or comparable EIA rack)
View all HP StorageWorks 16-EL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Installing the SAN Switch 2/16 6. Insert the switch with the attached inner rails into the outer rails. Note: This step applies to both the HP System/e rack and the HP 9000 Series or comparable EIA rack. 7. Install (2) #10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers with one on each side. See Figure 20 and Figure 21. Figure 20: Installing the switch into a rack (HP 9000 Series or comparable EIA rack) 54 SAN Switch 2/16 Version 3.1.x Installation Guide
Installing the SAN Switch 2/16
54
SAN Switch 2/16 Version 3.1.x Installation Guide
6.
Insert the switch with the attached inner rails into the outer rails.
Note:
This step applies to both the HP System/e rack and the HP 9000 Series or
comparable EIA rack.
7.
Install (2) #10-32 x 1/2-inch Phillips pan-head screws with captive star lock
washers with one on each side.
See
Figure 20
and
Figure 21
.
Figure 20:
Installing the switch into a rack (HP 9000 Series or comparable EIA rack)