HP StorageWorks 2/32 SAN switch 2/32 version 4.0.2b release notes - Page 37
Operands, This command has the following operands
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Fabric OS Commands includes the display of errors/ events recorded in the persistent error log during previous run time cycles and the display of error/event messages logged in the current run time cycle. This command also provides options to display ONLY those error log messages that are saved in the persistent log and to display ONLY those messages that are logged during the current run time cycle. All important error log messages, regardless of their message severity level, are stored in a persistent storage as they are logged. Both the persistent error log and the run time log are limited in space and managed as circular buffers. When either log overflows, old entries are replaced by new entries. The persistent error log is saved across system reboots and power cycles and can be resized at run time. When this command is executed from the Standby CP, the switch instance number operand is required. The switch instance number is supplied by specifying the operand. This operand is not required when logged into the Active CP. Operands This command has the following operands: p - Display messages from the persistent error log. a - Display messages from the active error log. This displays error log messages generated during the current run time cycle. s swinst - this is an optional parameter to specify a switch instance number. This parameter is required on the Standby CP. This parameter should not be used on the Active CP. You must follow -s with the switch instance number where the command is to be executed. Valid values for switchinstance are 0 (for the switch instance associated with slots 1 though 4) or 1 (for the switch instance associated with slots 6 though 10). SAN switch 2/32 Version 4.0.2b Release Notes 37