HP StorageWorks 2/32 SAN switch 2/32 version 4.0.2b release notes - Page 42
Example, See Also, errNvLogSizeSet Command, Description, Operands
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Fabric OS Commands command is to be executed. Valid values for switch instance are 0 (for the switch instance associated with slots 1 though 4) or 1 (for the switch instance associated with slots 6 though 10). Example Following example shows how to display current error log save level. switch:admin> errSaveLvlShow The following example shows how to display current error log save level on the Standby CP for switch 0. switch:admin> errSaveLvlShow -s 0 See Also errSaveLvlSet, errNvLogSizeSet, errNvLogSizeShow, errShow errNvLogSizeSet Command Short Description: Resize the persistent error log. This command is new for Fabric OS V4.0.2b or higher Syntax errNvLogSizeSet [-s swinst] number_of_entries Availability admin Description Use this command to resize the persistent error log of a switch to a new size specified by the operand number_of_entries. The persistent error log is resized immediately after the successful execution of this command. When this command is executed from the Standby CP, the switch instance number operand is required. The switch instance number is supplied by specifying the operand. This operand is not required when logged into the Active CP. Operands This command has the following operands: s swinst - This is an optional parameter. It specifies a switch instance number. 42 SAN switch 2/32 Version 4.0.2b Release Notes