HP StorageWorks 2/32 SAN switch 2/32 version 4.0.2b release notes - Page 39
Example, See Also, Clear messages ONLY from the persistent error log.
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Fabric OS Commands This parameter is required on the Standby CP. This parameter is not used on the Active CP. You must follow -s with the switch instance number where the command is to be executed. Valid values for switch instance are 0 (for the switch instance associated with slots 1 though 4) or 1 (for the switch instance associated with slots 6 though 10). p - Clear messages ONLY from the persistent error log. Example The following example shows how to clear the current run time error log on the Active CP: switch:admin> errClear The following example shows how to clear the persistent error log on the Active CP. switch:admin> errClear -p The following example shows how to clear the current run time error log on the Standby CP, for the switch instance 0.switch: admin> errClear -s 0 The following example shows how to clear the persistent error log on the Standby CP, for the switch instance 0. switch:admin>errClear -s 0 -p See Also errDump, errShow, errNvLogSizeSet, errNvLogSizeShow SAN switch 2/32 Version 4.0.2b Release Notes 39