HP StorageWorks 2/32 SAN switch 2/32 version 4.0.2b release notes - Page 38
Example, See Also, errClear Command, Description, Operands, Active CP.
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Fabric OS Commands Example To display the error log with page breaks: switch:admin> errShow Error 14 0x304 (fabos): Jun 14 11:57:52 Switch: 0, Warning FW-STATUS_SWITCH, 3, Switch status changed from HEALTHY/OK to Marginal/Warning Type to continue, Q to stop: See Also errDump, errSaveLvlSet, errSaveLvlShow, errNvLogSizeSet, errNvLogSizeShow errClear Command New operands have been added to this command. Short Description: Clear the switch error log. Syntax errClear [-s swinst] [-p] Availability admin Description Use this command to clear the error log for a particular switch instance. If no operand is specified, this command clears the error log in RAM; The persistent error log is not cleared. However, if -p option is specified, ONLY the persistent error log is cleared and the error log in RAM is not cleared. When this command is executed from the Standby CP, the switch instance number operand is required. The switch instance number is supplied by specifying the operand. This operand is not required when logged into the Active CP. Operands This command has the following operands: s swinst - This is an optional parameter to specify a switch instance number. 38 SAN switch 2/32 Version 4.0.2b Release Notes