HP StorageWorks 8/80 Brocade Fabric OS Command Reference Manual v6.2.0 (53-100 - Page 121

configDownload 2 "passwd" -local -USB | -U "file" Specifies the login password when you use the FTP protocol. Quotation marks are optional. Downloads a specified configuration file from a predetermined directory on the local chassis. Downloads a specified configuration file from a predetermined directory on an attached USB device. A file name in quotation marks, for example, "config.txt". This parameter can be used only with the -local or -USB option, each of which retrieves files from a predetermined directory on the local chassis or on an attached USB device. Therefore, subdirectories and absolute path names are not permitted. Examples To download the switch configuration file interactively to the current logical switch from a local directory (no chassis permissions). switch:admin> configdownload Protocol (scp, ftp, local, or usb) [ftp]: local File Name [config.txt]: config.txt *** CAUTION *** This command is used to download a backed-up configuration for a specific switch. If using a file from a different switch, this file's configuration settings will override any current switch settings. Downloading a configuration file, which was uploaded from a different type of switch, may cause this switch to fail. A switch reboot might be required for some parameter changes to take effect. configDownload operation may take several minutes to complete for large files. Do you want to continue [y/n]: y Activating configDownload: Switch is disabled configDownload complete: All config parameters are downloaded To download switch configuration data to the current logical switch from an external FTP server (no chassis permissions): switch:admin> configdownload -ftp 192.168.38.245,jdoe,config.txt,password To download all configuration data for the chassis and all logical switches (requires chassis permissions): switch:admin> configdownload -all -ftp 192.168.38.245,jdoe,config.txt,password To download switch configurations to a logical switch with FID 8 from an attached USB device (requires chassis permissions): switch:admin> configdownload -fid 8 -USB config.txt To download switch configurations belonging to a logical switch with FID 4 to a logical switch with FID 8 from an attached USB device (requires chassis permissions): switch:admin> configdownload -fid 8 -sfid 4 -USB config_fid8.txt Fabric OS Command Reference 93 53-1001186-01