HP StorageWorks 8/80 Brocade Fabric OS Command Reference Manual v6.2.0 (53-100 - Page 641

portLogShow 2 fcout read write err frame nsRemQ rscn xalloc xfree xerr xstate payload Port Cmd ioctl Tx & Rx scn pstate ctin fc f8 ctout errlog loopscn OLP LIP LIM BMP OLD TMO Args start disable enable Outgoing Fibre Channel information unit. Information unit header log from read operation. Information unit header log from write operation. Information unit header log of an FC error frame. FC frame payload. Interswitch name server query. RSCN. Allocate an exchange. Free an exchange. Exchange error. Exchange state. Frame payload. Displays the port number that logged the event. Defined by the event. Displays a value defined by the event as follows: I/O control command code. Frame payload size. New state (see state codes below). New physical state (see pstate codes below). The CT-subtype: Simple Name Server. Alias Server. Same as ctin. Error level (refer to errShow). The current loop state during loop initialization. Possible values are: Offline (disconnected or nonparticipating). FL_Port entered INITIALIZING or OPEN_INIT state. LISM completed, FL_Port became the loop master. Loop init completed, FL_Port in MONITORING state. Port transitioned to the OLD_PORT state. Loop init times out. Displays additional information about the event as follows: Start type: 0 = enable ports, 100 = disable ports. State (refer to state codes). Mode: 0 normal; non-zero loopback. Fabric OS Command Reference 613 53-1001186-01