HP StorageWorks 8/80 Brocade Fabric OS Command Reference Manual v6.2.0 (53-100 - Page 665

portShow 2 inbandmgmt Displays the status of the inband management configuration and IP addresses configured to enable inband management on the Brocade 7500 through GbE port interfaces. This command requires a port to be specified and displays the IP addresses for that port. In addition the output shows whether inband management is enabled or disabled. To display the routing table, use the portshow iproute command. Examples To display the state of a port: switch:admin> portshow 3/15 portName: portHealth: HEALTHY Authentication: None portDisableReason: None portCFlags: 0x1 portFlags: 0x4903 PRESENT ACTIVE E_PORT G_PORT U_PORT SEGMENTED LOGICAL_ONLINE LOGIN LED portType: 17.0 portState: 1 Online portPhys: 6 In_Sync portScn: 64 Segmented port generation number: 12 portId: 022f00 portIfId: 4332001e portWwn: 20:2f:00:05:1e:39:5b:75 portWwn of device(s) connected: Distance: normal portSpeed: N4Gbps LE domain: 0 FC Fastwrite: OFF Interrupts: Unknown: Lli: Proc_rqrd: Timed_out: Rx_flushed: Tx_unavail: Free_buffer: Overrun: Suspended: Parity_err: 2_parity_err: CMI_bus_err: 0 0 1211464 95542 0 0 0 0 0 0 0 0 0 Link_failure: 9 Loss_of_sync: 4810 Loss_of_sig: 9617 Protocol_err: 0 Invalid_word: 0 Invalid_crc: 0 Delim_err: 0 Address_err: 12 Lr_in: 4 Lr_out: 7 Ols_in: 2 Ols_out: 3 Frjt: 0 Fbsy: 0 Port part of other ADs: No To view xlate domains, you must be running a Brocade 7500 or a chassis with an FC4-18i blade. Note that the Front Domain ID is what is shown: switch:admin> portshow 8/4 portName: portHealth: No Fabric Watch License Authentication: None EX_Port Mode: Enabled Fabric ID: 20 Fabric OS Command Reference 637 53-1001186-01