HP StorageWorks 8/80 Brocade Fabric OS Command Reference Manual v6.2.0 (53-100 - Page 610

2 portCfgShow To display the configuration settings for a port with Access Gateway enabled: SW4016_5311:admin> portcfgshow Ports of Slot 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Speed AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN AL_PA Offset 13 Trunk Port ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON Locked N_Port ON ON .. ON ON ON Persistent Disable NPIV capability ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON where AN:AutoNegotiate, ..:OFF, ??:INVALID, LM:L0.5 To display the configuration settings for a single port: switch:admin> portcfgshow 2/16 Area Number: 144 Speed Level: AUTO AL_PA Offset 13: OFF Trunk Port ON Long Distance OFF VC Link Init OFF Locked L_Port OFF Locked G_Port OFF Disabled E_Port OFF ISL R_RDY Mode OFF RSCN Suppressed OFF Persistent Disable OFF NPIV capability ON QOS E_Port ON Mirror Port OFF Port Auto Disable ON To display FCIP tunnels configured on a GbE port. (refer to the portCfg help page for an explanation of the displayed parameters): switch:admin> portcfgshow 10/ge0 Mode: FCIP Persistent Disable: OFF Ipif configuration: Interface IP Address NetMask MTU 0 192.168.60.100 255.255.255.0 1500 1 192.168.60.101 255.255.255.0 2348 2 192.168.60.102 255.255.255.0 1260 3 192.168.60.103 255.255.255.0 1700 4 192.168.60.104 255.255.255.0 1400 5 192.168.60.105 255.255.255.0 2000 6 192.168.60.106 255.255.255.0 1300 7 192.168.60.107 255.255.255.0 2200 Interface IPv6 Address Len MTU Arp configuration: IP Address Mac Address 582 Fabric OS Command Reference 53-1001186-01