HP StorageWorks 8/80 Brocade Fabric OS Command Reference Manual v6.2.0 (53-100 - Page 813

sysShutDown 2 sysShutDown Provides a graceful shutdown to protect the switch file systems. Synopsis sysshutdown Description On standalone platforms, use this command to shut down the switch operating system. On enterprise-class platforms, when sysShutDown is called on the active control processor (CP), the command shuts down the active CP, standby CP, and any AP blades. After executing this command, manually power off the system. To reboot the system, manually turn the power switch on. Notes This command is not supported on the standby CP. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To perform a system shutdown on a standalone platform: switch:admin> sysshutdown This command will shutdown the operating systems on your switch. You are required to power-cycle the switch in order to restore operation. Are you sure you want to shutdown the switch [y/n]? y Broadcast message from root (ttyS0) Mon Sep 12 17:52:12 2005... The system is going down for system halt NOW !! INIT: Switching to runlevel: INIT: Sending processes the TERM signal ess095:root> Unmounting all filesystems. The system is halted flushing ide devices: hda Power down. To perform a system shutdown on a Brocade DCX-4S: switch:admin> sysshutdown This command will shutdown the operating systems on your switch. You are required to power-cycle the switch in order to restore operation. Are you sure you want to shutdown the switch [y/n]?y HA is disabled Shutting down blade in slot:1, IP addr:127.1.14.2 Shutting down blade in slot:8, IP addr:127.1.14.9 Shutting down OCP at:0.0.0.0 Broadcast message from root (pts/0) Wed Nov 5 19:03:06 2008... The system is going down for system halt NOW !! Fabric OS Command Reference 785 53-1001186-01