HP StorageWorks 8/80 Brocade Fabric OS Command Reference Manual v6.2.0 (53-100 - Page 132

2 configUpload Examples To upload the switch configuration interactively from a switch that is not enabled for Virtual Fabrics: switch:admin> configupload Protocol (scp, ftp, local) [ftp]: Server Name or IP Address [host]: 192.168.38.245 User Name [user]: jdoe File Name [config.txt]: Password: configUpload complete: All config parameters are uploaded To upload the switch configuration that belongs to a logical switch with FID 100: switch:admin> configupload Protocol (scp, ftp, local) [ftp]: Server Name or IP Address [host]: 10.32.220.100 User Name [user]: jdoe File Name [config.txt]: config.fid100.txt Section (all|chassis|FID# [all]): 100 Password: configUpload complete: All config parameters are uploaded To upload a chassis configuration to a local file from the command line forcing an overwrite: switch:admin> configupload -chassis -local -force config.txt configUpload complete: All config parameters are uploaded To upload the current logical switch configuration to an external FTP server: switch:admin> configupload -ftp 192.168.38.245,jdoe,config.txt,password To upload all configuration data to an external FTP server: switch:admin> configupload -all -ftp 192.168.38.245,jdoe,config.txt,password To upload the configuration file for a logical switch with FID 8 to an attached USB device: switch:admin> configupload -fid 8 -ftp -USB config.txt Diagnostics The configuration upload might fail for one or more of the following reasons: • The host name is not known to the switch. • The host IP address cannot be contacted. • The user does not have permission on the host. • The FTP server is not running on the host. See Also configDefault, configDownload, configShow, configList, configRemove, configure, configureChassis 104 Fabric OS Command Reference 53-1001186-01