HP StorageWorks 8/80 Brocade Fabric OS Command Reference Manual v6.2.0 (53-100 - Page 623
portDisable
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 623 highlights
portDisable 2 portDisable Synopsis Disables a port. portdisable [slot/]port Description Use this command to disable a port. If a port is connected to another switch when disabled, the fabric may reconfigure. Devices connected to this port can no longer communicate with the fabric. If the port was online before being disabled, a state transition will be indicated in one of the following ways: RSCN, SNMP trap, or Web pop-up window. Notes The front panel LED of a disabled port flashes yellow with a two-second cycle. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: slot On blades systems only, specify the slot number of the port to be disabled, followed by a slash (/). port Specify a port number to be disabled, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. Examples To disable a port: switch:admin> portdisable 2/4 See Also portCfgPersistentDisable, portCfgPersistentEnable, portEnable, portShow, switchShow Fabric OS Command Reference 595 53-1001186-01