HP StorageWorks 8/80 Brocade Fabric OS Command Reference Manual v6.2.0 (53-100 - Page 321

fosConfig 2 fosConfig Synopsis Description Notes Operands Displays or modifies Fabric OS features. fosconfig --enable feature fosconfig --disable feature fosconfig --show Use this command to enable or disable a feature, or to display the current operating status of features on a switch. This command can be run while the switch is online. The following features are supported (refer to the Notes for limitations): • FC Routing service (see fcrConfigure) • iSCSI service (see iscsiCfg) • iSNS client service (see isnscCfg) • Virtual Fabrics (see lfCfg) The features described may not be supported on all platforms. If you attempt to enable a feature that is not supported on your platform, an error message stating "Command not supported on this platform" is displayed. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. This command has the following operands: -enable feature Enables a feature on the switch. Valid values for feature are: fcr Enables the FC Routing service on the switch. The FC Routing service is disabled by default. Use fosConfig --show to determine if FCR is enabled or disabled, When enabling FCR, you may encounter one of the following system messages: "FC Routing service is in the process of being disabled, please try again after a few minutes." This means that a command to disable the FC Routing service is still in progress. Wait a few minutes and try again. "FC Routing service is already enabled." This means that the FC Routing service is already enabled. iSCSI Enables the iSCSI service on the switch. By default, iSCSI is disabled. iSNSC Enables the iSNSC service on the switch. By default, iSNSC is disabled. vf Enables Virtual Fabrics. By default, Virtual Fabrics are disabled. Before enabling the Virtual Fabrics, ensure that there are no Administrative Domains (ADs) in effect. Administrative Domains must be disabled before enabling Virtual Fabrics. This command prompts for confirmation, because the chassis reboots after this command is executed. Fabric OS Command Reference 293 53-1001186-01