HP StorageWorks 8/80 Brocade Fabric OS Command Reference Manual v6.2.0 (53-100 - Page 199

diagHelp 2 diagHelp Displays diagnostic command information. Synopsis diaghelp Description Use this command to display a short description of diagnostic commands. Use default operands when running diagnostics commands. Non-default settings require detailed knowledge of the underlying hardware and are intended for support personnel only. Contact support if you want to use these operands. Note The diaghelp command displays diagnostic commands that may not be available. Execute help command to verify availability. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To display diagnostic command information: switch:admin> diaghelp bpportloopbacktest bpturboramtest burninerrclear burninerrshow burninstatus Functional test of port via blade processor path. MBIST test for AP blade BP ASICs Clear errors that are stored in the non-volatile storage Display errors that are stored in the non-volatile storage Display the diagnostics burnin status. (output truncated) See Also none Fabric OS Command Reference 171 53-1001186-01