Home » HP Manuals » Storage Devices » HP StorageWorks 8/80 » Manual Viewer

HP StorageWorks 8/80 Brocade Fabric OS Command Reference Manual v6.2.0 (53-100 - Page 755

command. In Virtual Fabric mode, the User Ports Disabled

View all HP StorageWorks 8/80 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 755 highlights

slotShow 2 POWERING UP The blade is present and powering on. LOADING The blade is present, powered on, and loading the initial configuration. DIAG RUNNING POST1 The blade is present, powered on, and running the POST (power-on self-test). DIAG RUNNING POST2 The blade is present, powered on, and running the pre-boot power on self tests. INITIALIZING The blade is present, powered on, and initializing hardware components. ENABLED The blade is on and fully enabled. ENABLED (User Ports Disabled) The blade is on but the external ports have been disabled with the bladeDisable command. In Virtual Fabric mode, the "User Ports Disabled" information is suppressed, because ports may not physically belong to the switch. ENABLED (SAS Virtualization Disabled) The blade is on, but due to an incompatibility between the FOS image and the SAS or Application image, the SAS Virtualizaion services are disabled. Only applies to the FA4-18 blade. DISABLED The blade is powered on but disabled. FAULTY The blade is faulty because an error was detected. UNKNOWN The blade is inserted but its state cannot be determined. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. Operands This command supports the following operands: -p In addition to the basic slot status view, displays the following information about power consumption: • Direct current (DC) power consumption for each Blade in Watts. • Total alternate current (AC) Power Consumption in Watts. • AC efficiency, as a percentage of total and BTU. • Power efficiency in Watts/port and Watts/Gb. -m In addition to the basic slot status view, displays the Brocade model name for each blade. Examples To display a basic view of all slots and their status: switch:user> slotshow Slot Blade Type ID Status 1 SW BLADE 51 FAULTY 2 SW BLADE 51 DISABLED 3 SW BLADE 55 ENABLED(User Ports Disabled) 4 SW BLADE 51 DIAG RUNNING POST2 Fabric OS Command Reference 727 53-1001186-01

Section	Page
Contents	5
About This Document	19
In this chapter	19
How this document is organized	19
Supported hardware and software	19
What is new in this document	20
Document conventions	22
Text formatting	22
Command syntax conventions	23
Notes, cautions, and warnings	23
Key terms	24
Notice to the reader	24
Additional information	25
Brocade resources	25
Other industry resources	25
Getting technical help	25
Document feedback	27
Using Fabric OS Commands	29
In this chapter	29
Understanding role-based access control	29
Understanding Virtual Fabric restrictions	30
Understanding Admin Domain restrictions	31
Using the command line interface	31
Fabric OS Commands	33
aaaConfig	33
ad	38
ag	49
agshow	61
aliAdd	63
aliCreate	64
aliDelete	65
aliRemove	66
aliShow	67
aptPolicy	68
auditCfg	70
auditDump	72
authUtil	73
bannerSet	77
bannerShow	78
bcastShow	79
bladeDisable	80
bladeEnable	81
bpPortLoopbackTest	83
bpTurboRamTest	86
burninErrClear	87
burninErrShow	88
burninLevel	89
burninStatus	90
cfgActvShow	91
cfgAdd	92
cfgClear	93
cfgCreate	94
cfgDelete	95
cfgDisable	96
cfgEnable	97
cfgMcdtmode	98
cfgRemove	99
cfgSave	100
cfgSaveActiveToDefined	101
cfgShow	102
cfgSize	104
cfgTransAbort	106
cfgTransShow	107
chassisBeacon	108
chassisConfig	109
chassisEnable	110
chassisDisable	111
chassisName	112
chassisShow	113
cliHistory	115
configDefault	116
configDownload	118
configList	123
configRemove	124
configShow	125
configUpload	129
configure	133
configureChassis	141
cryptoCfg	143
dataTypeShow	190
date	191
dbgShow	193
defZone	194
diagClearError	196
diagDisablePost	197
diagEnablePost	198
diagHelp	199
diagPost	200
diagRetry	201
diagSetCycle	202
diagShow	203
dbgShow	204
distribute	205
dlsReset	207
dlsSet	208
dlsShow	209
dnsConfig	210
enclosureShow	211
errClear	212
errDelimiterSet	213
errDump	214
errFilterSet	216
errModuleShow	217
errShow	218
exit	220
fabPortShow	221
fabRetryShow	224
fabricLog	225
fabricPrincipal	227
fabricShow	229
fabStatsShow	231
fabSwitchShow	233
fanDisable	234
fanEnable	235
fanShow	236
fastboot	237
fastWriteCfg	238
fcipChipTest	240
fcipHelp	242
fcipPathTest	243
fcLunQuery	245
fcPing	246
fcpLogClear	250
fcpLogDisable	251
fcpLogEnable	252
fcpLogShow	253
fcpProbeShow	254
fcpRlsShow	255
fcrBcastConfig	256
fcrChipTest	258
fcrConfigure	260
fcrFabricShow	261
fcrlSan	263
fcrLsanCount	265
fcrLsanMatrix	266
fcrPathTest	271
fcrPhyDevShow	274
fcrProxyConfig	276
fcrProxyDevShow	278
fcrResourceShow	280
fcrRouterPortCost	282
fcrRouteShow	284
fcrXlateConfig	285
fddCfg	288
fdmiCacheShow	290
fdmiShow	291
ficonClear	292
ficonCupSet	293
ficonCupShow	295
ficonHelp	297
ficonShow	298
fipsCfg	304
firmwareCommit	307
firmwareDownload	308
firmwareDownloadStatus	313
firmwareKeyShow	316
firmwareKeyUpdate	317
firmwareRestore	319
firmwareShow	320
fosConfig	321
fruReplace	324
fspfShow	325
fwAlarmsFilterSet	327
fwAlarmsFilterShow	328
fwClassInit	329
fwConfigReload	330
fwConfigure	331
fwFruCfg	336
fwHelp	337
fwMailCfg	338
fwPortDetailShow	340
fwSamShow	343
fwSet	345
fwSetToCustom	346
fwSetToDefault	349
fwShow	352
h	355
haDisable	356
haDump	357
haEnable	359
haFailover	360
haShow	361
haSyncStart	363
haSyncStop	364
help	365
historyLastShow	366
historyMode	367
historyShow	368
httpCfgShow	370
i	371
iclCfg	373
ifModeSet	375
ifModeShow	377
interfaceShow	379
interopMode	383
iodDelayReset	386
iodDelayShow	387
iodReset	388
iodSet	389
iodShow	391
ipAddrSet	392
ipAddrShow	397
ipfilter	400
ipsecConfig	405
iscsiCfg	421
iscsiChipTest	429
iscsiHelp	430
iscsiPathTest	431
iscsiPortCfg	432
iscsiSessionCfg	435
iscsiSwCfg	437
islShow	438
isnscCfg	439
itemList	441
killTelnet	443
ldapCfg	444
lfCfg	446
licenseAdd	450
licenseHelp	451
licenseIdShow	452
licensePort	453
licenseRemove	455
licenseShow	456
linkCost	457
login	459
logout	460
lsanZoneShow	461
lsCfg	463
lsDbShow	468
fosExec	471
memShow	473
msCapabilityShow	474
msConfigure	475
msPlatShow	477
msPlatShowDBCB	478
msPlClearDB	479
msPlMgmtActivate	480
msPlMgmtDeactivate	481
msTdDisable	482
msTdEnable	483
msTdReadConfig	484
myId	485
nbrStateShow	486
nbrStatsClear	488
nodeFind	490
nsAliasShow	492
nsAllShow	496
nsCamShow	497
nsShow	499
nsZoneMember	502
passwd	505
passwdCfg	508
pathInfo	513
pdShow	519
perfAddEEMonitor	520
perfAddIPMonitor	524
perfAddReadMonitor	525
perfAddRWMonitor	526
perfAddSCSIMonitor	527
perfAddUserMonitor	528
perfAddWriteMonitor	530
perfCfgClear	531
perfCfgRestore	532
perfCfgSave	533
perfClearAlpaCrc	534
perfDelEEMonitor	535
perfDelFilterMonitor	536
perfHelp	537
perfMonitorClear	538
perfMonitorShow	540
perfSetPortEEMask	544
perfShowAlpaCrc	546
perfShowPortEEMask	547
perfTTmon	549
pkiCreate	552
pkiRemove	553
pkiShow	554
policy	555
portAddress	558
portAlpaShow	561
portBufferShow	562
portCamShow	564
portCfg	566
portCfgAlpa	581
portCfgAutoDisable	582
portCfgCreditRecovery	584
portCfgDefault	585
portCfgEport	586
portCfgEXPort	587
portCfgFportBuffers	590
portCfgGport	591
portCfgISLMode	592
portCfgLongDistance	594
portCfgLport	597
portCfgNPIVPort	599
portCfgNPort	601
portCfgPersistentDisable	602
portCfgPersistentEnable	603
PortCfgQos	604
portCfgShow	606
portCfgSpeed	613
portCfgTrunkPort	614
portCfgVEXPort	615
portCmd	618
portDebug	622
portDisable	623
portEnable	624
portErrShow	625
portFlagsShow	627
portLedTest	628
portLogClear	629
portLogConfigShow	630
portLogDisable	631
portLogDump	632
portLogDumpPort	633
portLogEnable	634
portLogEventShow	635
portLoginShow	636
portLogPdisc	637
portLogReset	638
portLogResize	639
portLogShow	640
portLogShowPort	645
portLogTypeDisable	646
portLogTypeEnable	647
portLoopbackTest	648
portMirror	651
portName	654
portPerfShow	655
portRouteShow	656
portShow	658
portStats64Show	677
portStatsClear	680
portStatsShow	681
portSwap	685
portSwapDisable	686
portSwapEnable	687
portSwapShow	688
portTest	689
portTestShow	691
portTrunkArea	692
portZoneShow	698
powerOffListSet	699
powerOffListShow	701
psShow	702
reboot	703
routeHelp	704
secActiveSize	705
secAuthSecret	706
secCertUtil	708
secDefineSize	714
secGlobalShow	715
secHelp	717
secPolicyAbort	718
secPolicyActivate	719
secPolicyAdd	720
secPolicyCreate	722
secPolicyDelete	725
secPolicyDump	727
secPolicyFCSMove	730
secPolicyRemove	732
secPolicySave	734
secPolicyShow	735
secStatsReset	737
secStatsShow	739
sensorShow	741
setContext	742
setDbg	743
setModem	744
setVerbose	745
sfpShow	746
shellFlowControlDisable	750
shellFlowControlEnable	751
slotPowerOff	752
slotPowerOn	753
slotShow	754
SnmpConfig	758
spinFab	765
sshUtil	768
statsClear	772
stopPortTest	773
supportFfdc	774
supportFtp	775
supportSave	777
supportShow	780
supportShowCfgDisable	783
supportShowCfgEnable	784
supportShowCfgShow	785
switchBeacon	786
switchCfgPersistentDisable	787
switchCfgPersistentEnable	788
switchCfgSpeed	789
switchCfgTrunk	790
switchDisable	791
switchEnable	792
switchName	793
switchShow	794
switchStatusPolicySet	800
switchStatusPolicyShow	802
switchStatusShow	804
switchUptime	806
switchViolation	807
syslogdFacility	808
syslogdIpAdd	809
syslogdIpRemove	811
syslogdIpShow	812
sysShutDown	813
systemVerification	815
tempShow	817
timeOut	818
topologyShow	819
traceDump	823
trackChangesHelp	825
trackChangesSet	826
trackChangesShow	827
trunkDebug	828
trunkShow	829
tsClockServer	831
tsTimeZone	833
turboRamTest	836
upTime	837
uRouteConfig	838
uRouteRemove	839
uRouteShow	840
usbStorage	842
userConfig	844
userRename	852
version	853
wwn	854
zone	855
zoneAdd	864
zoneCreate	865
zoneDelete	867
zoneHelp	868
zoneObjectCopy	869
zoneObjectExpung	870
zoneObjectRename	871
zoneRemove	872
zoneShow	873
Primary FCS commands	875
Primary FCS commands	875
Appendix A: Command availability	877
In this appendix	877
Command validation checks	877
Encryption commands and permissions	878

Match case Limit results 1 per page

Fabric OS Command Reference

727

53-1001186-01

slotShow

POWERING UP

The blade is present and powering on.

The blade is present, powered on, and loading the initial configuration.

DIAG RUNNING POST1

The blade is present, powered on, and running the POST (power-on self-test).

DIAG RUNNING POST2

The blade is present, powered on, and running the pre-boot power on self

tests.

INITIALIZING

The blade is present, powered on, and initializing hardware components.

ENABLED

The blade is on and fully enabled.

ENABLED (User Ports Disabled)

The blade is on but the external ports have been disabled with the

bladeDisable

command. In Virtual Fabric mode, the "User Ports Disabled"

information is suppressed, because ports may not physically belong to the

switch.

ENABLED (SAS Virtualization Disabled)

The blade is on, but due to an incompatibility between the FOS image and the

SAS or Application image, the SAS Virtualizaion services are disabled. Only

applies to the FA4-18 blade.

DISABLED

The blade is powered on but disabled.

FAULTY

The blade is faulty because an error was detected.

UNKNOWN

The blade is inserted but its state cannot be determined.

Note

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "

Using Fabric OS Commands

" and Appendix A, "

Command

Availability

" for details.

Operands

This command supports the following operands:

-p

In addition to the basic slot status view, displays the following information

about power consumption:

•

Direct current (DC) power consumption for each Blade in Watts.

•

Total alternate current (AC) Power Consumption in Watts.

•

AC efficiency, as a percentage of total and BTU.

•

Power efficiency in Watts/port and Watts/Gb.

-m

In addition to the basic slot status view, displays the Brocade model name for

each blade.

Examples

To display a basic view of all slots and their status:

switch:user>

slotshow

Slot

Blade Type

Status

-----------------------------------

SW BLADE

FAULTY

SW BLADE

DISABLED

SW BLADE

ENABLED(User Ports Disabled)

SW BLADE

DIAG RUNNING POST2