HP StorageWorks 8/80 Brocade Fabric OS Command Reference Manual v6.2.0 (53-100 - Page 144
Fabric OS Encryption Administrator's Guide, Group-wide policy configuration.
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
2 cryptoCfg Function 1. Node configuration Synopsis cryptocfg --help -nodecfg cryptocfg --initnode cryptocfg --initEE [slot_number] cryptocfg --regEE [slot_number] cryptocfg --setEE [slot_number]-routing shared|partitioned cryptocfg --enableEE [slot_number] cryptocfg --disableEE [slot_number] cryptocfg --export -scp -currentMK | -KACcert |-KACcsr| -CPcert] host_IP host_username host_file_path cryptocfg --export -usb -currentMK | -KACcert | -KACcsr |-CPcert] dest_filename cryptocfg --import -scp local_name host_IP host_username host_file_path cryptocfg --import -usb dest_filename source_filename cryptocfg --reg -membernode member_node_WWN member_node_certfile Member_node_IP_addr cryptocfg --dereg -membernode member_node_WWN cryptocfg --dhchallenge vault_IP_addr cryptocfg --dhresponse vault_IP_addr cryptocfg --zeroizeEE [slot_number] cryptocfg --delete -file local_name cryptocfg --show -file -all cryptocfg --show -localEE Description Use the node configuration commands to perform node initialization and configuration tasks. node initialization and configuration must be performed on every node. A node is an encryption switch or a chassis containing one or more encryption blades. A node is identified by the switch IP address or switch WWN, which is subsequently referred to as the "node WWN." The node configuration commands include the following functions: • Node initialization and certificate generation. • Certificate export and import to and from a specified host or USB device. • Enabling or disabling an encryption engine (EE). • Encryption group member node and group leader registration. • Group-wide policy configuration. • Zeroization of all critical security parameters on the local encryption switch or blade. • Certificate display and management. Note The initial setup includes preparatory steps that are outside the scope of the cryptoCfg command. For pre-initialization procedures, refer to the Fabric OS Encryption Administrator's Guide. 116 Fabric OS Command Reference 53-1001186-01