HP StorageWorks 8/80 Brocade Fabric OS Command Reference Manual v6.2.0 (53-100 - Page 664
Displays GbE port WWN and ISCSI Sessions., Displays Emulation Control Block port specific.
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 664 highlights
2 portShow -snapstart -snapshow ipif iproute iscsi mode ficon Resets TCP statistics. The collection of the statistics re-starts when this command is executed. It ends when the -snapshow option is executed. Displays the TCP statistics that were collected since startup or since the statistics were reset with the -snapshow command. Displays the IP interface ID, IP address, netmask, and MTU for IPv4 addresses. Displays the prefix instead of the netmask for IPv6 addresses. Displays the IP address, netmask, gateway, metrics, and flags. Displays the prefix instead of the netmask for IPv6 addresses. A status flag for the IP routes indicates if a route is used for the management interfaces. A route definition that uses one of the internal interfaces has the words "Interface Management" printed at the end of the line. Displays GbE port WWN and ISCSI Sessions. Displays mode of GbE port as either "FCIP" or "not configured". Displays FICON emulation configuration parameters. The syntax for this command is as follows: portshow ficon [Slot/]GePort all | tunnelId [arg] [parm] [-clear] The following arguments are supported with ficon: -globals Displays general FICON controls and statistics. -images Displays discovered Images (FCUB). -emul Displays emulated FDCBs. -active Displays active FDCBs. -epcb Displays Emulation Control Block (port specific). -fhpb -fdpb adrs Displays FICON Host Path Block. Displays FICON Device Path Block. -fchb Displays FICON Channel Control Block. -fcub -fdcb adrs -mem adrs Displays FICON Control Unit Control Block. Displays FICON Device Control Block. Displays memory in 256 byte increments: ! for next. -pools Displays current data buffer pool counts. -pmmr Displays PMMR pointers. -clear Clears post display statistics; requires a preceding argument. vlantag Displays VLAN tag configuration settings. ftrace FTRACE is a debug tool for developers and support (not intended for customer use). For usage information, execute portShow ftrace. 636 Fabric OS Command Reference 53-1001186-01