HP StorageWorks 8/80 Brocade Fabric OS Command Reference Manual v6.2.0 (53-100 - Page 578
To modify an FCIP tunnel, To create an FCIP tunnel using IPV6
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 578 highlights
2 portCfg destination netmask gateway Specifies the destination for the route. This is the IP address of the management station. This operand is required when adding or deleting a route. Specifies the subnet mask. This operand is required when adding or deleting a route. Specifies the gateway IP address. This operand is optional if the destination is in the same subnet as one of the IP interface addresses. If the destination is not part of the same subnet, you must specify a gateway IP address. Examples To add an ARP entry: switch:admin> portcfg arp ge0 add 192.168.255.25 00:01:02:03:04:60 Operation Succeeded To create an FCIP tunnel using IPV4: switch:admin> portcfg fciptunnel ge0 create 2 192.168.255.2 192.168.255.20 100000 Operation Succeeded To create an FCIP tunnel using IPV6: switch:admin> portcfg fciptunnel 8/ge0 create 0 4000::1234 2000::800:3333:1234 0 Operation Succeeded To modify an FCIP tunnel: switch:admin> portcfg fciptunnel 3/ge0 modify 6 -b 100000 -c 1 Operation Succeeded To create an FCIP tunnel with VC QoS mapping (default) turned on: switch:admin> portcfg fciptunnel ge1 create 1 192.168.200.109 192.168.200.108 0 -M To modify the default VC QoS map settings for VC 1: switch:admin> portcfg fciptunnel ge1 qosmap 1 3 -Q 29 switch:admin> portcfg fciptunnel ge1 qosmap 1 4 -Q 28 -P 7 switch:admin> portcfg fciptunnel ge1 qosmap 1 4 -P 2 To return the VC QoS map settings to default values: switch:admin> portcfg fciptunnel ge1 qosmap 1 -default To create an FCIP tunnel with VLAN tagging: switch:admin> portcfg fciptunnel8/ge0 create 1 192.168.10.1 192.168.20.1 0 -m 20 -v 100 -p 3 -P 7 Operation Succeeded To modify an existing FCIP tunnel with VLAN tagging: switch:admin> portcfg fciptunnel8/ge0 modify 1 192.168.10.1 192.168.20.1 0 -m 20 -v 100 To create an FCIP tunnel with Fastwrite and read/write pipelining enabled: switch:admin> portcfg fciptunnel 3/ge0 create 6 10.1.1.44 192.168.131.124 155000 -f -t 550 Fabric OS Command Reference 53-1001186-01