HP StorageWorks 8/80 Brocade Fabric OS Command Reference Manual v6.2.0 (53-100 - Page 158

2 cryptoCfg node_WWN slot_number Specifies the node WWN of the switch or chassis to which the encryption engine belongs. Specifies the encryption engine slot number on bladed systems. --remove -haclustermember Removes one or both encryption engine members from an already configured HA cluster. This command is valid only on the group leader. This command only removes the failover/failback capability for the removed EEs; it does not affect the relationship between configured CryptoTarget containers and the encryption engine that is removed from the HA cluster. The containers still belong to this encryption engine and encryption operations continue. node_WWN slot_number The following operands are required with the --rem command: Specifies the WWN of the switch or chassis to which the encryption engine belongs. Specifies the encryption engine slot number on bladed systems. --replace Replaces an encryption engine, either failed or alive, with an alternate encryption engine. All target associations for the current encryption engine are transferred over to the alternate encryption engine when this command is executed. The alternate encryption engine does not have to be part of the current HA cluster. Upon successful replacement, the alternate encryption engine automatically becomes part of the configured HA cluster and disrupted peer relationships are repaired. This command is only valid on the group leader. The following operands are supported with the --replace command: -haclustermember HA_cluster_name Specifies the HA cluster member to be replaced. The HA cluster name must be specified when this operand is used. This operand is optional. It is not needed if the encryption engine to be replaced is not part of a HA cluster. current_node_WWN [slot_number] Specifies the WWN of the encryption engine to be replaced. This operand is required. On bladed systems, include the encryption engine slot number. new_node_WWN [slot_number] Specifies the WWN of the encryption engine that is to replace the current encryption engine. This operand is required. On bladed systems, include the encryption engine's slot number. --show -hacluster Displays the specified HA clusters in the encryption group and associated state information for all HA clusters or for a single, specified HA cluster. When invoked on a member node, only the committed HA cluster configuration is displayed. When invoked on the group leader, both defined and committed configuration data is displayed. The following operands are mutually exclusive: -all Displays configuration information for all HA clusters. HA_cluster_name Displays configuration information for a specified HA cluster. 130 Fabric OS Command Reference 53-1001186-01