HP StorageWorks 8/80 Brocade Fabric OS Command Reference Manual v6.2.0 (53-100 - Page 584

2 portCfgCreditRecovery portCfgCreditRecovery Synopsis Enables or disables credit recovery on a port. portcfgcreditrecovery --disable | --enable [slot/]port Description Use this command to enable or disable credit recovery on a port. The credit recovery feature enables credits or frames to be recovered. Only ports configured as long distance ports can utilize the credit recovery feature. The default credit recovery configuration is enabled. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: --disable Disables credit recovery configuration on the specified port. --enable Enables credit recovery configuration on the specified port. --help Displays command usage. Examples To enable credit recovery on a port: switch:admin> portcfgcreditrecovery --enable 3/15 To disable credit recovery on a port: portcfgcreditrecovery --disable 3/15 See Also portCfgShow 556 Fabric OS Command Reference 53-1001186-01