HP StorageWorks 8/80 HP StorageWorks 8Gb SAN Switch hardware reference manual - Page 17
/80 SAN Switch features, Nonport side of the 8/40 SAN Switch
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Nonport side of the 8/40 SAN Switch The nonport side includes the two redundant power supply fan assemblies and the corresponding status LEDs. Figure 3 shows the nonport side of the 8/40 SAN Switch. 12 3 4 56 7 8 26451a 1. Fan (for power supply/fan FRU2) 5. Fan (for power supply/fan FRU1) 2. Power supply/fan status LED (for power supply/fan 6. Power supply/fan status LED (for Power Supply/fan FRU2) FRU 1) 3. Power supply connector (for power supply/fan FRU2) 7. Power supply connector (for power supply/fan FRU 1) 4. Fan (for power supply/fan FRU2) 8. Fan (for power supply/fan FRU1) Figure 3 Nonport side view-8/40 SAN Switch Activating additional 8/40 SAN Switch ports By default, the 8/40 SAN Switch model integrates 24 licensed ports (ports 0 through 23). To enable additional ports, you must purchase and install the HP Storage Works 8/40 SAN Switch 8Gb 8-port Upgrade LTU (part number T5519A): • To enable ports 24 through 31, you must purchase and install one upgrade license. • To enable ports 32 through 40, you must purchase and install a second upgrade license. See Installing and activating Port Upgrade licenses, page 20. 8/80 SAN Switch features • Provides the EZSwitchSetup Wizard for easy setup and basic configuration. • Integrates 1, 2, 4, and 8Gb/s autosensing Fibre Channel switch and router ports. • Includes a system motherboard that features a Freescale MPC8548 Reduced Instruction Set Computer (RISC) CPU running @ 1.3GHz with integrated peripherals that provides high performance with low power consumption. • Ships FICON, FICON Cascading, and FICON Control Unit Port (CUP) ready. • Provides two hot-swappable, redundant power supply FRUs. • Provides three hot-swappable fan FRUs in an N+1 configuration to provide hardware-redundant cooling. • Provides universal ports that self-configure as E_Ports, F_Ports, M_Ports, or FL_Ports. Ex_Ports are activated on a per-port basis with the optional HP B-series 48-80 Port SAN Switch Integrated Routing LTU. This license provides native Fibre Channel Routing (FCR) on a per-port basis, rather than limiting routing ports to those on a dedicated routing blade or switch. Just like traditional FCR, Integrated Routing uses EX_Ports to import and export devices between fabrics, enabling selective device sharing while maintaining remote fabric isolation. See Table 5, page 23 for ordering information. • Integrates a Universal Serial Bus (USB) port that provides storage for firmware updates, output of the supportsave command and storage for configuration uploads and downloads. 8Gb SAN Switch hardware reference manual 17