HP StorageWorks 8/80 HP StorageWorks 8Gb SAN Switch hardware reference manual - Page 51
Port side LED activity for the 8/80 SAN Switch
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
1 2 3 4 5 6 7 10 9 8 26459a 1 Power supply #2 status LED 2 Power supply #2 3 Fan assembly #3 4 Fan assembly #2 5 Fan assembly #1 6 Power supply #1 Status LED 7 Power supply #1 8 Fan assembly #3 status LED 9 Fan assembly #2 status LED 10 Fan Assembly #1 Status LED Figure 23 Identifying 8/80 SAN Switch nonport side LEDs Port side LED activity for the 8/80 SAN Switch Table 10 describe LEDs and recommended actions. Table 10 8Gb SAN Switch port side LED patterns LED name LED color Status of hardware Recommended action Power status No light System is off or there is an internal power supply failure. Verify that the system is powered on (power supply switches to "1"), the power cables are attached, and your power source is live. If the system power LED is not green, the unit may be faulty. Contact your switch service provider. Steady green System is on and power supplies are functioning properly. No action required. No light System is off or there is no power. Verify that the system is on and has completed booting. Steady green System is on and functioning properly. No action required. System status Steady amber (for more than five seconds) Unknown state, boot failed, or the system is faulty. This LED displays steady amber during POST. This is normal and does not indicate a fault. Perform the following steps: nl 1. Connect a serial cable. 2. Reboot the system. 3. Check the failure message on the console. 4. If this does not work, contact your service provider. 8Gb SAN Switch hardware reference manual 51