HP StorageWorks 8/80 HP StorageWorks 8Gb SAN Switch hardware reference manual - Page 62

SAN Switch management features, Table 13 Management tools

Get HP StorageWorks 8/80 - SAN Switch PDF manuals and user guides View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

11. Optional: Issue the psshow command at the CLI prompt to display power supply status. Fabric OS identifies the power supplies in a 8/80 SAN Switch from left to right as PS2 and PS1, as shown in Figure 27 on page 61. SAN Switch management features SAN Switches use built-in management tools to help you monitor fabric topology, check port status, and debug the switch. Table 13 lists the management tools available. When running IP over FC, these management tools must be supported by both HBA and HBA drivers. For a list of supported HBAs, see the HP StorageWorks SAN design guide: http://www.hp.com/go/sandesignguide. Table 13 Management tools Management tool CLI-Up to two admin sessions and four user sessions simultaneously Out-of-band support In-band support Ethernet or serial connection IP over FC Web Tools-For information, refer to the Web Tools administrator's guide for the Fabric OS version running on your switch. Ethernet or serial connection Standard SNMP applications-For information, refer to the Fabric OS MIB reference manual for the Fabric OS version running on your switch. Ethernet or serial connection IP over FC IP over FC Fabric Manager (Optional)-For information, refer to the Fabric Manager User's Guide. Ethernet or serial connection IP over FC Management Server-For information, refer to the Fabric OS administrator's guide and the Fabric OS command reference manual for the Fabric OS version running on your switch. Ethernet or serial connection Native in-band interface (over HBA only) 62 Operating the 8Gb SAN Switch

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
11.
Optional: Issue the
psshow
command at the CLI prompt to display power supply status.
Fabric OS identi
fi
es the power supplies in a 8/80 SAN Switch from left to right as PS2 and PS1,
as shown in
Figure 27
on page 61.
SAN Switch management features
SAN Switches use built-in management tools to help you monitor fabric topology, check port status, and
debug the switch.
Table 13
lists the management tools available.
When running IP over FC, these management tools must be supported by both HBA and
HBA drivers.
For a list of supported HBAs, see the
HP StorageWorks SAN design guide
:
h
t
t
p
:
/
/
w
w
w
.
h
p
.
c
o
m
/
g
o
/
s
a
n
d
e
s
i
g
n
g
u
i
d
e
.
Table 13 Management tools
Management tool
Out-of-band support
In-band support
CLI
—Up to two admin sessions and
four user sessions simultaneously
Ethernet or serial connection
IP over FC
Web Tools
—For information, refer to
the
Web Tools administrator’s guide
for
the Fabric OS version running on your
switch.
Ethernet or serial connection
IP over FC
Standard SNMP applications
—For
information, refer to the
Fabric OS MIB
reference manual
for the Fabric OS
version running on your switch.
Ethernet or serial connection
IP over FC
Fabric Manager (Optional)
—For
information, refer to the
Fabric
Manager User’s Guide
.
Ethernet or serial connection
IP over FC
Management Server
—For information,
refer to the
Fabric OS administrator’s
guide
and the
Fabric OS command
reference manual
for the Fabric OS
version running on your switch.
Ethernet or serial connection
Native in-band
interface (over HBA
only)
62
Operating the 8Gb SAN Switch