HP Superdome SX2000 Installation Guide, Sixth Edition - HP Integrity Superdome - Page 35

Installing the Rear Blower Bezel, Installing the Upper Front Door Assembly

Get HP Superdome SX2000 PDF manuals and user guides View all HP Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Figure 1-22 Installing the Upper Front Door Assembly 6. Feed the grounding strap through the door and attach it to the cabinet. 7. Insert the shoulder studs on the upper door bezel into the holes on the front door metal chassis. 8. Using a T-10 driver, secure the upper door bezel to the metal door with eight of the screws provided. Be sure to press down on the hinge side of the bezel while tightening the screws to prevent misalignment of the bezel. 9. Reattach all filters removed in step 1. Installing the Rear Blower Bezel The rear blower bezel is a cosmetic cover for the blowers and is located above the rear door. To install the rear blower bezel, follow these steps: 1. Open the rear cabinet door. NOTE: The latch is located on the right side of the door. 2. Slide the bezel over the blower housing frame, hooking the lip of the bezel onto the cross support of the blower housing while holding the bottom of the bezel. Rotate the bezel downward from the top until the bottom snaps in place (Figure 1-23 (page 36)). Setting Up the System 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Figure 1-22 Installing the Upper Front Door Assembly
6.
Feed the grounding strap through the door and attach it to the cabinet.
7.
Insert the shoulder studs on the upper door bezel into the holes on the front door metal
chassis.
8.
Using a T-10 driver, secure the upper door bezel to the metal door with eight of the screws
provided. Be sure to press down on the hinge side of the bezel while tightening the screws
to prevent misalignment of the bezel.
9.
Reattach all filters removed in step 1.
Installing the Rear Blower Bezel
The rear blower bezel is a cosmetic cover for the blowers and is located above the rear door.
To install the rear blower bezel, follow these steps:
1.
Open the rear cabinet door.
NOTE:
The latch is located on the right side of the door.
2.
Slide the bezel over the blower housing frame, hooking the lip of the bezel onto the cross
support of the blower housing while holding the bottom of the bezel. Rotate the bezel
downward from the top until the bottom snaps in place (
Figure 1-23 (page 36)
).
Setting Up the System
35