HP Tc4200 Hardware-Software Guide - Page 104
Using the Audio-In (Microphone) Jack, When connecting a device to the headphone jack
View all HP Tc4200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Multimedia Using the Audio-In (Microphone) Jack The tablet PC is equipped with a stereo microphone jack. When connecting a microphone to the microphone jack, use a microphone with a 3.5-mm plug. ■ If you connect a stereo (dual-channel) microphone, stereo sound will be recorded. ■ If you connect a monaural (single-channel) microphone, left-channel sound will record on both channels. ■ If you connect a dynamic microphone, the recommended sensitivity may not be achieved. ✎ When an external microphone is connected to the tablet PC, the tablet PC internal microphone is disabled. Using the Audio-Out (Headphone) Jack Å WARNING: To reduce the risk of personal injury, adjust the volume before putting on headphones or a headset. Ä CAUTION: To prevent possible damage to an external device, do not plug a single sound channel (monaural) connector into the headphone jack. The stereo (dual-channel) headphone jack is used to connect headphones, and also to connect the audio input connector of an audio/video device such as a television or VCR. When connecting a device to the headphone jack: ■ Use only a 3.5-mm stereo plug. ■ For best sound quality, use 24-ohm to 32-ohm headphones. ✎ When the a device is connected to the headphone jack, the internal speaker is disabled. Hardware and Software Guide 5-3