HP Tc4200 Hardware-Software Guide - Page 201
Entering Power-On Passwords, Requiring a Power-On Password at Restart
View all HP Tc4200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
Security Entering Power-On Passwords At the power-on password prompt, type your password, and then press enter. After 3 unsuccessful attempts to enter the password, you must restart the tablet PC and try again. Requiring a Power-On Password at Restart You can require that a power-on password be entered each time the tablet PC is restarted. Enable and disable this feature in Computer Setup: 1. Shut down the tablet PC. If you are not sure whether the tablet PC is off or in hibernation, turn the tablet PC on by sliding the power button, and then shut down the tablet PC through the operating system. 2. Be sure that the hard drive is inserted into the tablet PC (not into an optional docking device or external MultiBay). 3. Open Computer Setup by turning on or restarting the tablet PC. Press f10 while the F10 = ROM Based Setup message is displayed in the lower-left corner of the screen. ❏ To change the language, press f2. ❏ For navigation instructions, press f1. 4. Use the arrow keys to select Security > Password options > Require password on restart. 5. Toggle the field to enable or disable, and then press enter. 6. Save your preferences by using the arrow keys to select File > Save changes and exit. Then follow the instructions on the screen. Your preferences are set when you exit Computer Setup and take effect when the tablet PC restarts. Hardware and Software Guide 14-12