HP Visualize J5000 hp Visualize J5000, J7000 workstations parts removal and re - Page 50

System Board Cooling Fans

Page 50 highlights

Parts Removal and Replacement System Board Cooling Fans System Board Cooling Fans This section describes how to remove and replace the System Board Cooling Fans. NOTE Prior to removing the System Board Cooling Fans, the Front, Top, and Side panels need to be removed. See the appropriate section(s) for removing and replacing these components. Removing the Front Air Guides and Support Bars (J7000 Only) Figure 2-45. J7000's Open Left Side Before Removing Air Guide Support Bar Front Air Guide Four T-15 Torx Screws Support Bar 1. Remove the four T-15 Torx screws from the front air guide. This will release it from the support bar. Pull the front air guide straight out. 50 Chapter 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

50
Chapter 2
Parts Removal and Replacement
System Board Cooling Fans
System Board Cooling Fans
This section describes how to remove and replace the System Board Cooling Fans.
NOTE
Prior to removing the System Board Cooling Fans, the Front, Top, and Side
panels need to be removed. See the appropriate section(s) for removing and
replacing these components.
Removing the Front Air Guides and Support Bars (J7000 Only)
Figure2-45. J7000’s Open Left Side Before Removing Air Guide
1. Remove the four T-15 Torx screws from the front air guide. This will release it from the
support bar. Pull the front air guide straight out.
Support
Bar
Front
Air
Guide
Support
Bar
Four
T-15
Torx
Screws