IBM 8668 Hardware Maintenance Manual - Page 120
Fixed Disk with SCSI ID NN on RAID adapter in PCI slot S., Remove USB devices from USB1 and USB2.
UPC - 087944723158
View all IBM 8668 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Error Code/Symptom FRU/Action 015-XXX-015 (Failed USB external loopback 1. Make sure parallel port is not disabled. test) 2. Re-run USB external loopback test. 3. System Board 015-XXX-198 (USB device connected during 1. Remove USB devices from USB1 and USB2. USB test) 2. Re-run USB external loopback test. 3. System Board 020-XXX-000 (Failed PCI Interface test) 1. System Board 030-XXX-000 (Failed Internal SCSI interface 1. System Board test) 030-XXX-00N (Failed SCSI test on PCI slot 1. Adapter N. Check system error log before replacing a FRU.) 035-XXX-099 1. No adapters were found. 2. If adapter is installed re-check connection. 035-XXX-S99 (Failed RAID test on PCI slot 1. Cable S. Check System Error Log before replacing a FRU.) 2. SCSI Backplane 3. Adapter 4. System Board 035-XXX-SNN (Check System Error Log before replacing a FRU. NN = SCSI ID of failing fixed disk.) 1. Fixed Disk with SCSI ID NN on RAID adapter in PCI slot S. 035-253-S99 (RAID adapter initialization failure) 1. ServeRAID Adapter in slot S is not configured properly. Obtain the basic and extended configuration status and refer to the ServeRAID Hardware Maintenance Manual for more information. 2. Cable 3. SCSI Backplane 4. Adapter 075-XXX-000 (Failed Power Supply test) 1. Power Supply 089-XXX-001 (Failed Microprocessor test) 1. VRM 1 2. Microprocessor 1 3. System Planar 089-XXX-002 (Failed Optional Microprocessor test) 1. VRM 2 2. Microprocessor 2 3. System Planar 166-198-000 System Management: Aborted 1. Re-run the Diagnostic test (Unable to communicate with ASM adapter. It may be busy. Run the test again) (Communication with ASM adapter has failed) 2. Fix other error conditions and retry. These include other Failed System Management tests, and items logged in the optional ASM adapter's System Error Log. 3. Disconnect all server and option power cords from server, wait 30 seconds, reconnect, and retry. 4. Advanced System Management adapter, if installed. 5. System board 112 Hardware Maintenance Manual: xSeries 232, Type 8668